Parallel shank jobber and stub series drills and Morse taper shank drills

Parallel shank jobber and stub series drills and Morse taper shank drills — Technical Corrigendum 1

Parallel shank jobber and stub series drills and Morse taper shank drills

Hand reamers

Reamers — Part 2: Long fluted machine reamers with Morse taper shanks

Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares

Reduction sleeves and extension sockets for tools with Morse taper shanks

Drill chuck tapers

Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels

Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels

Shanks for turning and planing tools — Types and dimensions of the section

Shanks for turning and planing tools — Shapes and dimensions of the section

Carbide tips for brazing on turning tools

Carbide tips for brazing on turning tools

Turning tools with carbide tips — External tools

Turning tools with carbide tips — External tools

Machine tools — Self-holding tapers for tool shanks

7/24 tapers for tool shanks for manual changing

Parallel shank twist drills — Long series

Cylindrical shank twist drills — Long series

Cylindrical shank twist drills — Long series

Turning tools with carbide tips — Designation and marking

Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application

Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application

Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1

Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application

Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application

Turning tools with carbide tips — Internal tools

Turning tools with carbide tips — Internal tools

Machine chucking reamers with parallel shanks or Morse taper shanks

Machine chucking reamers with cylindrical shanks and Morse taper shanks

Special tolerances for reamers

Short machine taps and hand taps

Short machine taps and hand taps

Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation

Milling machine arbors with 7/24 tapers — Part 2: Accessories

Centre drills for centre holes without protecting chamfers — Type A

Centre drills for centre holes without protecting chamfers — Type A

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions

Machine tools — Morse taper shanks — Cotter slots with taper keys

End mills and slot drills — Part 1: Milling cutters with cylindrical shanks

End mills and slot drills — Part 1: Milling cutters with cylindrical shanks

End mills and slot drills — Part 2: Milling cutters with Morse taper shanks

End mills and slot drills — Part 2: Dimensions and designation of milling cutters with Morse taper shanks

End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks

End mills and slot drills — Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks

Indexable inserts for cutting tools — Designation

Indexable inserts for cutting tools — Designation

Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts

Indexable inserts for cutting tools — Designation

Indexable inserts for cutting tools — Designation — Technical Corrigendum 1

Indexable inserts for cutting tools — Designation

Indexable inserts for cutting tools — Designation

Machine bridge reamers

Machine bridge reamers

Machine bridge reamers

Finishing reamers for morse and metric tapers, with parallel shanks and morse taper shanks

Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks

Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks

Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps

Hand taps for parallel and taper pipe threads — General dimensions and marking

Hand taps for parallel and taper pipe threads — General dimensions and marking

Metal slitting saws with fine and coarse teeth — Metric series

Metal slitting saws with fine and coarse teeth — Metric series

Metal slitting saws with fine and coarse teeth — Metric series

Drills for use prior to tapping screw threads

Hacksaw blades — Part 2: Dimensions for machine blades

Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers

Centre drills for centre holes with protecting chamfer — Type B

Centre drills for centre holes with protecting chamfer — Type B

Centre drills for centre holes with radius form — Type R

Centre drills for centre holes with radius form — Type R

Hand- and machine-operated circular screwing dies and hand-operated die stocks

Cylindrical cutters with plain bore and key drive — Metric series

Cylindrical cutters with plain bore and key drive — Metric series

Slotting cutters with plain bore and key drive — Metric series

Shell end mills with plain bore and tenon drive — Metric series

Side and face milling cutters with plain bore and key drive — Metric series

Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series

Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Technical Corrigendum 1

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2

Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm

Circular saw blades for woodworking — Dimensions

Milling cutters mounted on centring arbors having a 7/24 taper — Fitting dimensions — Centring arbors

Milling cutters mounted on centring arbors having a 7/24 taper — Inserted tooth cutters

Single point cutting tools — Corner radii

Single point cutting tools — Corner radii

Extra-long Morse taper shank twist drills

Extra-long Morse taper shank twist drills

Extra-long parallel shank twist drills

Extra-long parallel shank twist drills

Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive

Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive

Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive

Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive

Narrow bandsaw blades for woodworking — Dimensions

Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive

T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole

Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks

Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks

Cylindrical shanks for milling cutters — Part 3: Dimensional characteristics of threaded shanks

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions

Subland twist drills with Morse taper shanks for holes prior to tapping screw threads

Subland twist drills for holes prior to tapping screw threads

Subland twist drills with cylindrical shanks for holes prior to tapping screw threads

Hand taper pin reamers

Machine taper pin reamers with parallel shanks

Machine taper pin reamers with parallel shanks

Machine taper pin reamers with Morse taper shanks

Machine taper pin reamers with Morse taper shanks

Tool-life testing with single-point turning tools

Milling cutters — Nomenclature

Milling cutters — Nomenclature — Technical Corrigendum 1

Inverse dovetail cutters and dovetail cutters with cylindrical shanks

Bore cutters with key drive — Form milling cutters with constant profile

Bore cutters with key drive — Form milling cutters with constant profile

Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions

Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper

Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper

Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface

Tapered die-sinking cutters with parallel shanks

Reduction sleeves with external 7/24 taper for tools with Morse taper shanks

Parallel shank tools — Driving tenons and sockets — Dimensions

Countersinks, 90 degrees, with Morse taper shanks and detachable pilots

Countersinks, 90°, with Morse taper shanks and detachable pilots

Countersinks, 90 degrees, with parallel shanks and solid pilots

Countersinks, 90°, with parallel shanks and solid pilots

Counterbores with parallel shanks and solid pilots

Counterbores with parallel shanks and solid pilots

Counterbores with Morse taper shanks and detachable pilots

Counterbores with Morse taper shanks and detachable pilots

Detachable pilots for use with counterbores and 90 degrees countersinks — Dimensions

Hand- and machine-operated circular screwing dies for taper pipe threads — R series

Hand- and machine-operated circular screwing dies for taper pipe threads — R series

Hand- and machine-operated circular screwing dies for parallel pipe threads - G series

Hand- and machine-operated circular screwing dies for parallel pipe threads — G series

Jig bushes — Definitions and nomenclature

Metal cutting band saw blades — Part 1: Definitions and terminology

Metal-cutting band saw blades — Part 1: Vocabulary

Metal cutting band saw blades — Part 2: Basic dimensions and tolerances

Metal-cutting band saw blades — Part 2: Characteristics and dimensions

Hardmetal heading dies — Terminology

As-sintered hardmetal pellets used in heading dies — Dimensions and tolerances

Machine tools — Positive drive of Morse tapers

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation

Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw

Twist drills — Terms, definitions and types

Twist drills — Terms, definitions and types — Technical Corrigendum 1

Reamers — Terms, definitions and types

Ground high speed steel tool bits

Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions

Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions

Turning and copying tool holders and cartridges for indexable inserts — Designation

Turning and copying tool holders and cartridges for indexable inserts — Designation

Turning and copying tool holders and cartridges for indexable inserts — Designation

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 1: Designation, styles, dimensions and calculation for corrections

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 2: Style F

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 3: Style K

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 4: Style L

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 5: Style U

Tool holders for internal turning with cylindrical shank for indexable inserts — Part 6: Style Q

Boring bars for indexable inserts — Dimensions

Boring bars for indexable inserts — Dimensions

Boring bars for indexable inserts — Dimensions — Amendment 1

Boring bars for indexable inserts — Dimensions

Boring bars for indexable inserts — Dimensions

Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions

Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions

Tool holders with rectangular shank for indexable inserts — Part 2: Style A

Tool holders with rectangular shank for indexable inserts — Part 2: Style A

Tool holders with rectangular shank for indexable inserts — Part 3: Style B

Tool holders with rectangular shank for indexable inserts — Part 3: Style B

Tool holders with rectangular shank for indexable inserts — Part 4: Style D

Tool holders with rectangular shank for indexable inserts — Part 4: Style D

Tool holders with rectangular shank for indexable inserts — Part 5: Style F

Tool holders with rectangular shank for indexable inserts — Part 5: Style F

Tool holders with rectangular shank for indexable inserts — Part 6: Style G

Tool holders with rectangular shank for indexable inserts — Part 6: Style G

Tool holders with rectangular shank for indexable inserts — Part 7: Style J

Tool holders with rectangular shank for indexable inserts — Part 7: Style J

Tool holders with rectangular shank for indexable inserts — Part 8: Style K

Tool holders with rectangular shank for indexable inserts — Part 8: Style K

Tool holders with rectangular shank for indexable inserts — Part 9: Style L

Tool holders with rectangular shank for indexable inserts — Part 9: Style L

Tool holders with rectangular shank for indexable inserts — Part 10: Style N

Tool holders with rectangular shank for indexable inserts — Part 10: Style N

Tool holders with rectangular shank for indexable inserts — Part 11: Style R

Tool holders with rectangular shank for indexable inserts — Part 11: Style R

Tool holders with rectangular shank for indexable inserts — Part 12: Style S

Tool holders with rectangular shank for indexable inserts — Part 12: Style S

Tool holders with rectangular shank for indexable inserts — Part 13: Style T

Tool holders with rectangular shank for indexable inserts — Part 13: Style T

Tool holders with rectangular shank for indexable inserts — Part 14: Style H

Tool holders with rectangular shank for indexable inserts — Part 14: Style H

Tool holders with rectangular shank for indexable inserts — Part 15: Style V

Tool holders with rectangular shank for indexable inserts — Part 15: Style V

Single point tool holders for turning and copying, for indexable inserts — Dimensions

Single-point tool holders for turning and copying, for indexable inserts — Dimensions

Single-point tool holders for turning and copying, for indexable inserts — Dimensions — Amendment 1

Single-point tool holders for turning and copying, for indexable inserts — Dimensions

Single-point tool holders for turning and copying, for indexable inserts — Dimensions

Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions

Cartridges, type A, for indexable inserts — Part 2: Style F

Cartridges, type A, for indexable inserts — Part 3: Style G

Cartridges, type A, for indexable inserts — Part 4: Style J

Cartridges, type A, for indexable inserts — Part 5: Style K

Cartridges, type A, for indexable inserts — Part 6: Style L

Cartridges, type A, for indexable inserts — Part 7: Style R

Cartridges, type A, for indexable inserts — Part 8: Style S

Cartridges, type A, for indexable inserts — Part 9: Style T

Cartridges, type A, for indexable inserts — Part 10: Style U

Cartridges, type A, for indexable inserts — Part 11: Style W

Cartridges, type A, for indexable inserts — Part 12: Style Y

Cartridges, type A, for indexable inserts — Dimensions — Addendum 1

Cartridges, type A, for indexable inserts — Dimensions

Cartridges, type A, for indexable inserts — Dimensions

Polygonal turret interface with flat contact surface — Part 1: Shanks of type F, H and A

Polygonal turret interface with flat contact surface — Part 2: Receivers of type F, H, A and X for shanks of type F, H and A

Polygonal turret interface with flat contact surface — Part 3: Coupling for driven tool holders with shanks of type F and A

Taps and thread cutting — Nomenclature of the main types and terminology

Circular screwing dies — Terminology

Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion

Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion — Technical Corrigendum 1

Double equal angle cutters with plain bore and key drive

Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation

Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation

Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation

End mills with indexable inserts — Part 1: End mills with flatted parallel shank

End mills with indexable inserts — Part 1: End mills with flatted cylindrical shank

End mills with indexable inserts — Part 2: End mills with Morse taper shank

End mills with indexable inserts — Part 2: End mills with Morse taper shank

Face milling cutters with indexable inserts — Dimensions

Face and shoulder milling cutters with indexable inserts — Dimensions

Side and face milling (slotting) cutters with indexable inserts — Dimensions

Side and face milling (slotting) cutters with indexable inserts — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance

Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance

Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions

Core drills with parallel shanks and with Morse taper shanks

Core drills with parallel shanks and with Morse taper shanks

Hexagonal dienuts

Saw teeth for woodworking saws — Profile shape — Terminology and designation

Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions

Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF

Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics

Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF

Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF

Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF

Bore type milling cutters for indexable inserts — Designation

Hardmetal burrs — Part 1: General specifications

Hardmetal burrs — Part 1: General specifications

Hardmetal burrs — Part 2: Cylindrical burrs (style A)

Hardmetal burrs — Part 2: Cylindrical burrs (style A)

Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)

Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)

Hardmetal burrs — Part 4: Spherical burrs (style D)

Hardmetal burrs — Part 4: Spherical burrs (style D)

Hardmetal burrs — Part 5: Oval burrs (style E)

Hardmetal burrs — Part 5: Oval burrs (style E)

Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)

Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)

Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)

Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)

Hardmetal burrs — Part 8: Flame burrs (style H)

Hardmetal burrs — Part 8: Flame burrs (style H)

Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)

Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)

Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)

Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)

Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)

Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)

Hardmetal burrs — Part 12: Inverted cone burrs (style N)

Hardmetal burrs — Part 12: Inverted cone burrs (style N)

Shank type milling cutters for indexable inserts — Designation

Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess

Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess

Tool life testing in milling — Part 1: Face milling

Tool life testing in milling — Part 2: End milling

High-speed steel machine taps with ground threads — Technical specifications

7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF

7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF

Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole

Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole

Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole

Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole

Machine tools — Front faces of spindle holders for machining centres — Functional dimensions

Drills with indexable inserts — Cylindrical shanks with a parallel flat

Drills with indexable inserts — Cylindrical shanks with a parallel flat

End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank

End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank

End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank

End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank

Dimensions of accessories for cutter arbors with parallel key and tenon drive

Cutter arbors with parallel key and tenon drive — Part 1: General dimensions

Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface

Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer

Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer

Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface

Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system

Key type three-jaw drill chucks — Specification

Keyless type three-jaw drill chucks — Specification

Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions

Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs

Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat

Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat

Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat

Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat

Tool holders with cylindrical shank — Part 7: Type F with taper seat

Tool holders with cylindrical shank — Part 8: Type Z, accessories

Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts

Spot drills

Spot drills

High-speed steel two-flute twist drills — Technical specifications

Classification and designation of approximate chip control zones for indexable inserts with chipbreakers

Solid hardmetal end mills with parallel shank — Dimensions

Solid hardmetal end mills with cylindrical shank — Dimensions

Solid hardmetal end mills with cylindrical shank — Dimensions

Cutting tools — Designation of high-speed steel groups

Cutting tools — Designation of high-speed steel groups

Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation

Milling cutters — Designation — Part 1: Shank type end mills of solid or tipped design

Milling cutters — Designation — Part 1: Shank-type end mills of solid or tipped design

Milling cutters — Designation — Part 2: Shank type and bore type milling cutters with indexable inserts

Milling cutters — Designation — Part 2: Shank-type and bore-type milling cutters with indexable inserts

Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges

Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions

Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB

Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions

Hollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB

Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools

Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U

Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools

Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U

Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES

Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES

Woodruff keaseat cutters — Dimensions

Woodruff keyseat cutters — Dimensions

Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions

Milling cutters for high speed machining — Safety requirements

Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials — Dimensions

Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials

Cubic boron nitride inserts, tipped or solid — Dimensions, types

Cubic boron nitride inserts, tipped or solid — Dimensions, types

Polycristalline diamond inserts, tipped — Dimensions, types

Polycristalline diamond inserts, tipped — Dimensions, types

Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions

CVD diamond tools — Categorization

Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series

Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series

Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers

Modular taper interface with ball track system — Part 3: Dimensions of shanks, four locking elements

Modular taper interface with ball track system — Part 4: Dimensions of receivers, four locking elements

Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks

Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks

Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers