Filter :
Standard and/or project under the direct responsibility of ISO/TC 164/SC 3 Secretariat | Stage | ICS |
---|---|---|
Brinell hardness test for steel
|
95.99 | |
Rockwell hardness test (B and C scales) for steel
|
95.99 | |
Vickers hardness test for steel (Load 5 to 100 kgf)
|
95.99 | |
Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2
|
95.99 | |
Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100
|
95.99 | |
Metallic materials — Hardness test — Verification of Brinell hardness testing machines
|
95.99 | |
Brinell hardness test for light metals and their alloys
|
95.99 | |
Wickers hardness test for light metals and their alloys
|
95.99 | |
Vickers hardness test for copper and copper alloys (Test loads from 2.5 to 50 kgf)
|
95.99 | |
Brinell hardness test for copper and copper alloys
|
95.99 | |
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100
|
95.99 | |
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5
|
95.99 | |
Tables of Vickers hardness values (HV) for metallic materials
|
95.99 | |
Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces
|
95.99 | |
Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2
|
95.99 | |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100
|
95.99 | |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
|
95.99 | |
Calibration of standardized blocks to be used for Rockwell B and C scale hardness testing machines
|
95.99 | |
Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
|
95.99 | |
Verification of Rockwell B and C scale hardness testing machines
|
95.99 | |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines
|
95.99 | |
Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)
|
95.99 | |
Rockwell superficial hardness test (N and T scales) for steel
|
95.99 | |
Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
|
95.99 | |
Verification of Rockwell superficial N and T scale hardness testing machines
|
95.99 | |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
|
95.99 | |
Calibration of standardized blocks to be used for Rockwell superficial N and T scale hardness testing machines
|
95.99 | |
Copper and copper alloys — Rockwell superficial hardness test (N and T scales)
|
95.99 | |
Copper and copper alloys — Rockwell hardness test (B, F and G scales)
|
95.99 | |
Metallic and other inorganic coatings — Vickers and Knoop microhardness tests
|
95.99 | |
Metallic materials — Knoop hardness test — Part 1: Test method
|
95.99 | |
Metallic materials — Knoop hardness test — Part 1: Test method
|
95.99 | |
Metallic materials — Knoop hardness test — Part 1: Test method
|
60.60 | |
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | |
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
|
90.93 | |
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
|
95.99 | |
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
|
90.93 | |
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
|
95.99 | |
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
|
90.93 | |
Metallic materials — Hardness test — Knoop test
|
95.99 | |
Metallic materials — Hardness test — Verification of Knoop hardness testing machines
|
95.99 | |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Knoop hardness testing machines
|
95.99 | |
Metallic materials — Brinell hardness test — Part 1: Test method
|
95.99 | |
Metallic materials — Brinell hardness test — Part 1: Test method
|
95.99 | |
Metallic materials — Brinell hardness test — Part 1: Test method
|
90.92 | |
Metallic materials — Brinell hardness test — Part 1: Test method
|
40.99 | |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
90.92 | |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
40.99 | |
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
|
95.99 | |
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
|
95.99 | |
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
|
90.92 | |
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
|
40.99 | |
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
|
95.99 | |
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
|
90.93 | |
Metallic materials — Hardness test — Brinell test
|
95.99 | |
Metallic materials — Hardness test — Vickers test — Part 1: HV 5 to HV 100
|
95.99 | |
Metallic materials — Vickers hardness test — Part 1: Test method
|
95.99 | |
Metallic materials — Vickers hardness test — Part 1: Test method
|
95.99 | |
Metallic materials — Vickers hardness test — Part 1: Test method
|
95.99 | |
Metallic materials — Vickers hardness test — Part 1: Test method
|
60.60 | |
Metallic materials — Hardness test — Vickers test — Part 2: HV 0,2 to less than HV 5
|
95.99 | |
Metallic materials — Vickers hardness test — Part 2: Verification of testing machines
|
95.99 | |
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | |
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
|
90.93 | |
Metallic materials — Hardness test — Vickers test — Part 3: Less than HV 0,2
|
95.99 | |
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
|
95.99 | |
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
|
95.99 | |
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
|
90.93 | |
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
|
95.99 | |
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
|
90.93 | |
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 1: Test method
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 1: Test method
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 1: Test method
|
60.60 | |
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
|
60.60 | |
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
|
95.99 | |
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
|
60.60 | |
Metallic materials — Hardness test — Rockwell test (scales A - B - C - D - E - F - G - H - K)
|
95.99 | |
Metallic materials — Hardness testing — Tables of Knoop hardness values for use in tests made on flat surfaces
|
95.99 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
|
95.99 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
|
90.92 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
|
40.20 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
|
95.99 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
|
90.92 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
|
40.20 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
|
95.99 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
|
90.92 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
|
40.20 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
|
95.99 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
|
90.93 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
|
60.60 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 6: Instrumented indentation test at elevated temperature
|
30.99 |
|
Metallic materials — Hardness test — Universal test
|
95.99 | |
Metallic materials — Leeb hardness test — Part 1: Test method
|
90.93 | |
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices
|
90.93 | |
Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
|
90.93 | |
Metallic materials — Conversion of hardness values
|
95.99 | |
Metallic materials — Conversion of hardness values
|
90.93 | |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
|
60.60 | |
Metallic materials — Measurement of mechanical properties by an instrumented indentation test — Indentation tensile properties
|
90.93 |
No matching records found. Please try changing the filter settings.