Iron ores — Determination of hygroscopic moisture in analytical samples

Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric and Karl Fischer methods

Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods

Iron ores — Determination of total iron content — Part 1: Titrimetric method after tin(II) chloride reduction

Iron ores — Determination of total iron content — Part 1: Titrimetric method after tin(II) chloride reduction

Iron ores — Determination of total iron content — Part 2: Titrimetric methods after titanium(III) chloride reduction

Iron ores — Determination of total iron content — Part 2: Titrimetric methods after titanium(III) chloride reduction

Iron ores — Determination of total iron content — Part 2: Titrimetric methods after titanium(III) chloride reduction

Iron ores — Determination of total iron content — Part 4: Potentiometric titration method

Iron ores — Determination of total iron content — Volumetric method

Iron ores — Determination of silicon content — Part 1: Gravimetric methods

Iron ores — Determination of silicon content — Part 2: Reduced molybdosilicate spectrophotometric method

Iron ores — Determination of silicon content — Gravimetric methods

Iron ores — Determination of phosphorus content — Titrimetric method

Iron ores — Determination of phosphorus content — Titrimetric method

Iron ores — Determination of aluminium content — Oxine gravimetric and titrimetric methods

Iron ores — Increment sampling — Manual method

Iron ores — Increment sampling and sample preparation — Mechanical method

Iron ores — Sampling and sample preparation procedures

Iron ores — Sampling and sample preparation procedures

Iron ores — Sampling and sample preparation procedures

Iron ores — Sampling and sample preparation procedures — Technical Corrigendum 1

Iron ores — Sampling and sample preparation procedures

Iron ores — Preparation of samples — Manual method

Iron ores — Experimental methods for evaluation of quality variation

Iron ores — Experimental methods for evaluation of quality variation

Iron ores — Experimental methods for evaluation of quality variation

Iron ores — Experimental methods for checking the precision of sampling

Iron ores — Experimental methods for checking the precision of sampling

Iron ores — Experimental methods for checking the precision of sampling

Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement

Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement

Iron ores — Experimental methods for checking the bias of sampling

Iron ores — Experimental methods for checking the bias of sampling

Iron ores — Experimental methods for checking the bias of sampling

Iron ores — Experimental methods for checking the bias of sampling

Iron ores — Determination of moisture content

Iron ores — Determination of moisture content of a consignment

Iron ores — Determination of moisture content of a lot

Iron ores — Determination of the moisture content of a lot

Iron ores — Determination of the moisture content of a lot

Iron ores — Determination of tumbler strength

Iron ores — Determination of tumble strength

Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices

Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices

Iron ores (maximum particle size 40 mm or smaller) — Determination of bulk density

Iron ores — Determination of bulk density

Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density

Iron ores — Determination of manganese content — Spectrophotometric method

Iron ores — Determination of manganese content — Periodate spectrophotometric method

Iron ores — Determination of phosphorus content — Part 1: Molybdenum blue spectrophotometric method

Iron ores — Determination of phosphorus content — Molybdenum blue spectrophotometric method

Iron ores — Determination of aluminium content — Part 1: Flame atomic absorption spectrometric method

Iron ores — Determination of aluminium — Part 1: Flame atomic absorption spectrometric method

Iron ores — Determination of aluminium — Part 1: Flame atomic absorption spectrometric method

Iron ores — Determination of aluminium content — Flame atomic absorption spectrometric method

Iron ores — Determination of sulfur content — Part 1: Barium sulfate gravimetric method

Iron ores — Determination of sulfur content — Part 2: Combustion/titration method

Iron ores — Determination of sulfur content — Part 2: Combustion/titration method

Iron ores — Determination of sulfur content — Part 2: Combustion/titration method

Iron ores — Determination of sulfur content — Part 3: Combustion/infrared method

Iron ores — Determination of sulfur content — Part 3: Combustion/infrared method

Iron ores — Determination of sulfur content — Part 3: Combustion/infrared method

Iron ores — Determination of sulfur content — Barium sulfate gravimetric method

Iron ores — Determination of sulfur content — Combustion method

Iron ores — Determination of titanium content — Diantipyrylmethane spectrophotometric method

Iron ores — Determination of titanium — Diantipyrylmethane spectrophotometric method

Iron ores — Determination of calcium and/or magnesium contents — Flame atomic absorption spectrometric method

Iron ores — Determination of copper content — Flame atomic absorption spectrometric method

Iron ores — Determination of fluorine content — Ion-selective electrode method

Iron ores — Determination of reducibility

Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index

Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index

Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index

Iron ores — Static test for low-temperature reduction-disintegration — Part 1: Reaction with CO, CO2 and H2

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2

Iron ores — Static test for low-temperature reduction-disintegration — Part 2: Reaction with CO

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2

Iron ores — Low-temperature disintegration test — Method using cold tumbling after static reduction

Iron ore pellets — Determination of relative free-swelling index

Iron ore pellets for blast furnace feedstocks — Determination of the free-swelling index

Iron ore pellets for blast furnace feedstocks — Determination of the free-swelling index

Iron ore pellets — Determination of crushing strength

Iron ore pellets — Determination of crushing strength

Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength

Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength

Iron ores — Determination of size distribution by sieving

Iron ores — Determination of size distribution by sieving

Iron ores and direct reduced iron — Determination of size distribution by sieving

Iron ores and direct reduced iron — Determination of size distribution by sieving — Technical Corrigendum 1

Iron ores and direct reduced iron — Determination of size distribution by sieving

Iron ores and direct reduced iron — Determination of size distribution by sieving

Direct reduced iron — Determination of metallic iron content — Bromine-methanol titrimetric method

Direct reduced iron — Determination of metallic iron content — Bromine-methanol titrimetric method

Direct reduced iron — Determination of metallic iron — Bromine-methanol titrimetric method

Iron ores — Determination of copper content — Part 1: 2,2'-Biquinolyl spectrophotometric method

Iron ores — Determination of copper — Part 1: 2,2'-Biquinolyl spectrophotometric method

Iron ores — Determination of copper — Part 2: Flame atomic absorption spectrometric method

Iron ores — Determination of bulk density for ores of maximum particle size larger than 40 mm

Iron ores — Determination of aluminium content — EDTA titrimetric method

Iron ores — Determination of sodium and/or potassium contents — Flame atomic absorption spectrometric method

Iron ores — Determination of relative reducibility

Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index

Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index

Iron ores — Determination of combined water content — Karl Fischer titrimetric method

Iron ores — Preparation of predried test samples for chemical analysis

Iron ores — Preparation of predried test samples for chemical analysis

Iron ores — Determination of arsenic content — Molybdenum blue spectrophotometric method

Iron ores — Determination of reduction properties under load

Iron ores for blast furnace feedstocks — Determination of reduction under load

Iron ores for blast furnace feedstocks — Determination of reduction under load

Iron ores for blast furnace feedstocks — Determination of reduction under load

Iron ore fines — Method for presentation of the results of sintering tests

Iron ores — Determination of decrepitation index

Iron ores for blast furnace feedstocks — Determination of the decrepitation index

Iron ores for blast furnace feedstocks — Determination of the decrepitation index

Iron ores for blast furnace feedstocks — Determination of the decrepitation index

Iron ores — Determination of lead and/or zinc content — Flame atomic absorption spectrometric method

Iron ores — Determination of acid-soluble iron(II) content — Titrimetric method

Iron ores — Determination of total iron content — Titanium(III) chloride reduction methods

Iron ores — Determination of total iron content — Silver reduction titrimetric method

Iron ores — Determination of various elements by X-ray fluorescence spectrometry — Part 1: Comprehensive procedure

Iron ores — Determination of various elements by X-ray fluorescence spectrometry — Part 2: Single element calibration procedure

Iron ores — Determination of various elements by X-ray fluorescence spectrometry — Part 4: Performance-based method using fusion preparation method

Iron ores — Determination of silicon, calcium, manganese, aluminium, titanium, magnesium, phosphorus, sulfur and potassium — Wavelength dispersive X-ray fluorescence spectrometric method

Iron ores — Determination of water soluble chloride content — Ion-selective electrode method

Iron ores — Determination of water-soluble chloride — Ion-selective electrode method

Iron ores — Determination of manganese content — Part 1: Flame atomic absorption spectrometric method

Iron ores — Determination of manganese content — Part 1: Flame atomic absorption spectrometric method

Iron ores — Determination of manganese content — Part 2: Periodate spectrophotometric method

Iron ores — Determination of vanadium — Part 1: BPHA spectrophotometric method

Iron ores — Determination of vanadium — Part 2: Flame atomic absorption spectrometric methods

Iron ores — Determination of vanadium content — BPHA spectrophotometric method

Iron ores — Determination of vanadium content — Flame atomic absorption spectrometric methods

Iron ores — Determination of nickel and/or chromium contents — Flame atomic absorption spectrometric method

Direct reduced iron — Determination of carbon and/or sulfur content — High frequency combustion method with infrared measurement

Direct reduced iron — Determination of carbon and/or sulfur — High-frequency combustion method with infrared measurement

Direct reduced iron — Determination of carbon and/or sulfur — High-frequency combustion method with infrared measurement

Iron ores — Determination of calcium content — Flame atomic absorption spectrometric method

Iron ores — Determination of calcium — Flame atomic absorption spectrometric method

Iron ores — Determination of calcium — Flame atomic absorption spectrometric method

Iron ores — Determination of calcium — Flame atomic absorption spectrometric method

Iron ores — Determination of magnesium content — Flame atomic absorption spectrometric method

Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method

Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method

Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method

Direct reduced iron — Sampling and sample preparation — Manual methods for reduced pellets and lump ores

Direct reduced iron and hot briquetted iron — Sampling and sample preparation

Iron ores — Method of sampling and sample preparation for physical testing

Iron ore pellets — Determination of clustering of feedstock for direct reduction by gas reforming processes

Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index

Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index

Iron ores — Determination of disintegration and metallization of feedstock for direct reduction by gas reforming processes

Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization

Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization

Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization

Iron ores — Determination of reducibility and metallization of feedstock for direct reduction by gas reforming processes

Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization

Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization

Iron ores — Vocabulary

Iron ore and direct reduced iron — Vocabulary

Iron ore and direct reduced iron — Vocabulary

Iron ores — Recommended procedures for iron ore dissolution using either acid digestion or alkali fusion

Iron ores — Certified reference materials — Preparation and certification for use in chemical analysis

Iron ores — Determination of cobalt content — Flame atomic absorption spectrometric method

Iron ores — Determination of cobalt — Flame atomic absorption spectrometric method

Iron ores — Determination of tin content — Flame atomic absorption spectrometric method

Iron ores — Determination of tin — Flame atomic absorption spectrometric method

Iron ores — Determination of various elements — Inductively coupled plasma atomic emission spectrometric method

Iron ores — Determination of various elements — Inductively coupled plasma atomic emission spectrometric method

Iron ores — Determination of loss on ignition — Gravimetric method

Iron ores — Currently traded international ores

Iron ores — Determination of zinc content — Flame atomic absorption spectrometric method

Iron ores — Determination of lead content — Flame atomic absorption spectrometric method

Iron ores — Determination of potassium content — Flame atomic absorption spectrometric method

Iron ores — Determination of potassium —- Flame atomic absorption spectrometric method

Iron ores — Determination of potassium — Flame atomic absorption spectrometric method

Iron ores — Determination of sodium content — Flame atomic absorption spectrometric method

Iron ores — Determination of sodium — Flame atomic absorption spectrometric method

Iron ores — Determination of sodium — Flame atomic absorption spectrometric method

Iron ores — Dynamic test for low-temperature reduction-disintegration

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method

Iron ores — Determination of nickel — Flame atomic absorption spectrometric method

Iron ores — Determination of nickel — Flame atomic absorption spectrometric method

Iron ores — Determination of nickel — Flame atomic absorption spectrometric method

Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method

Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method

Direct reduced iron — Determination of tumble strength of hot briquetted iron (HBI)

Direct reduced iron — Determination of the tumble and abrasion indices of hot briquetted iron (HBI)

Direct reduced iron — Determination of apparent density and water absorption of hot briquetted iron (HBI)

Direct reduced iron — Determination of apparent density and water absorption of hot briquetted iron (HBI)

Iron ores — Guidelines for the use of certified reference materials (CRMs)

Iron ores — Determination of chlorine content — X-ray fluorescence spectrometric method

Iron ores — Sampling of slurries

Iron ores — Determination of metallic iron content — Iron(III) chloride titrimetric method

Direct reduced iron and hot briquetted iron — Determination of metallic iron — Iron(III) chloride titrimetric method

Iron ores — Determination of arsenic content — Hydride generation atomic absorption spectrometric method

Iron ores — Determination of loss on ignition — Non-oxidised ores

Iron ores — Wavelength dispersive X-ray fluorescence spectrometers — Determination of precision

Guidelines for good XRF laboratory practice for the iron ore industry

Iron ores — Determination of specific surface area — Test method using air-permeability apparatus (Blaine)

Iron ores — Determination of total iron content using the EDTA photometric titration method — Part 1: Microwave digestion method

Iron ores — Determination of total iron content — EDTA photometric titration method

Iron ores — Determination of trace elements — Plasma spectrometric method