ISO 15494:2015
2015-10
Resumen
ISO 15494:2015 specifies the characteristics and requirements for components such as pipes, fittings, and valves made from one of the following materials intended to be used for thermoplastics piping systems in the field of industrial applications above and below ground:
- polybutene (PB);
- polyethylene (PE);
- polyethylene of raised temperature resistance (PE-RT);
- crosslinked polyethylene (PE-X);
- polypropylene (PP).
NOTE 1 Requirements for industrial valves are given in this International Standard and/or in other standards. Valves are to be used with components conforming to this International Standard provided that they conform additionally to the relevant requirements of this International Standard.
This International Standard is applicable to either PB, PE, PE-RT, PE-X, or PP pipes, fittings, valves, and their joints and to joints with components of other plastics and non-plastic materials, depending on their suitability, intended to be used for the conveyance of liquid and gaseous fluids as well as solid matter in fluids for industrial applications such as the following:
- chemical plants;
- industrial sewerage engineering;
- power engineering (cooling and general purpose water);
- mining;
- electroplating and pickling plants;
- semiconductor industry;
- agricultural production plants;
- fire fighting;
- water treatment;
- geothermal.
NOTE 2 Where relevant, national regulations (e.g. water treatment) are applicable.
Other application areas are permitted if the requirements of this International Standard and/or applicable national requirements are fulfilled.
National regulations in respect of fire behaviour and explosion risk are applicable.
The components have to withstand the mechanical, thermal, and chemical demands to be expected and have to be resistant to the fluids to be conveyed.
Informaciones generales
-
Estado: PublicadoFecha de publicación: 2015-10Etapa: Norma Internacional para revisar [90.92]
-
Edición: 2Número de páginas: 100
-
Comité Técnico :ISO/TC 138/SC 3ICS :23.040.01
- RSS actualizaciones
Modificaciones
Las enmiendas se emiten cuando se decide que puede ser necesario agregar nuevo material a un documento de normalización existente. También pueden incluir correcciones editoriales o técnicas que deban aplicarse al documento existente.
Amendment 1
Edición 2020
Ciclo de vida
-
Anteriormente
RetiradaISO 15494:2003
-
Ahora
-
00
Preliminar
-
10
Propuesta
-
20
Preparación
-
30
Comité
-
40
Consulta
-
50
Aprobación
-
60
Publicación
-
90
Revisión
-
95
Retirada
Modificaciones
Aportan contenido adicional; disponible para su compra; no incluidas en el texto de la norma existente.PublicadoISO 15494:2015/Amd 1:2020
-
00
-
Será reemplazada por
En desarrolloISO/CD 15494
