ISO 13693-2:2015

Indisponible en français

Le dernier examen de cette norme date de 2020. Cette édition reste donc d’actualité.

Résumé

ISO 13693-2:2015 specifies the construction and performance requirement and test methods for metal-bodied chemigation valves with water at temperatures not exceeding 50 °C, which might contain fertilizers and chemicals of the types and concentration used in agriculture.

The valve is designed to prohibit backflow caused by either back pressure or back siphonage. It is not designed for use in potable water systems. It is not to be confused with other forms of backflow prevention devices including pressure vacuum breakers, double check valves, reduced pressure zone valves, or goose neck loops. ISO 13693-2:2015 specifies the minimum design, construction, and performance testing requirements for the chemigation valve assembly. The assembly consists of the following components: ? a valve body into which a spring-loaded check valve is mounted with a resilient disk cover on the sealing surface; a combination air release/vacuum relief valve located upstream of the check valve; a low pressure drain valve located upstream of the check valve; an inspection port located so as to permit visual and manual inspection of the valve working components.

Informations générales

État actuel
: Publiée

Date de publication
: 2015-02
Edition
: 1
Comité technique
: ISO/TC 23/SC 18 Matériels et réseaux d'irrigation et de drainage
ICS
:
65.060.35 Matériel d'irrigation et de drainage