Filter :
Standard and/or project | Stage | TC |
---|---|---|
Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point — Technical Corrigendum 1
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point
|
90.93 | ISO/TC 38/SC 2 |
Textile fabrics — Determination of resistance to water penetration — Hydrostatic pressure test
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Determination of resistance to water penetration — Hydrostatic pressure test
|
90.92 | ISO/TC 38/SC 2 |
Textiles — Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery — Part 1: Method of the horizontally folded specimen
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery — Part 2: Method of the vertically folded specimen
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Determination of the recovery from creasing of a horizontally folded specimen of fabric by measuring the angle of recovery
|
95.99 | ISO/TC 38/SC 24 |
Wool — Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester
|
95.99 | ISO/TC 38 |
Textiles — Woven fabric descriptions
|
95.99 | ISO/TC 38/SC 20 |
Textiles — Woven fabric descriptions
|
90.93 | ISO/TC 38/SC 20 |
Textiles — Determination of dimensional change of fabrics induced by free-steam
|
90.93 | ISO/TC 38/SC 2 |
Textiles — Weaves — Definitions of general terms and basic weaves
|
90.93 | ISO/TC 38/SC 20 |
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
|
95.99 | ISO/TC 38 |
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change — Technical Corrigendum 1
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change — Technical Corrigendum 2
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
|
90.93 | ISO/TC 38/SC 2 |
Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Woven fabrics — Measurement of width of pieces
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Woven fabrics — Measurement of length of pieces
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Determination of resistance to surface wetting (spray test) of fabrics
|
95.99 | ISO/TC 38/SC 2 |
Textile fabrics — Determination of resistance to surface wetting (spray test)
|
90.93 | ISO/TC 38/SC 2 |
Textiles — Woven fabrics — Determination of breaking strength and elongation (Strip method)
|
95.99 | ISO/TC 38 |
Textiles — Woven fabrics — Determination of breaking strength — Grab method
|
95.99 | ISO/TC 38 |
Textiles — Determination of thickness of woven and knitted fabrics (other than textile floor coverings)
|
95.99 | ISO/TC 38 |
Textiles — Determination of thickness of textiles and textile products
|
90.20 | ISO/TC 38/SC 24 |
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens
|
95.99 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens — Amendment 1
|
95.99 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens
|
90.92 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens
|
95.99 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens — Amendment 1
|
95.99 | ISO/TC 38 |
Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens
|
90.92 | ISO/TC 38 |
Textiles — Woven fabrics — Construction — Methods of analysis — Part 1: Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Methods for analysis of woven fabrics construction — Part 2: Determination of number of threads per unit length
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Woven fabrics — Construction — Methods of analysis — Part 4: Determination of twist in yarn removed from fabric
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Woven fabrics - Construction - Methods of analysis — Part 5: Determination of linear density of yarn removed from fabric
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Methods for analysis of woven fabrics construction — Part 5: Determination of linear density of yarn removed from fabric
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Methods for analysis of woven fabrics construction — Part 6: Determination of the mass of warp and weft per unit area of fabric
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Method for assessing the appearance of durable press fabrics after domestic washing and drying
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Test method for assessing the smoothness appearance of fabrics after cleansing
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Test method for assessing the smoothness appearance of fabrics after cleansing
|
90.93 | ISO/TC 38/SC 2 |
Textiles — Method for assessing the appearance of creases in durable-press products after domestic washing and drying
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Test method for assessing the appearance of creases in fabrics after cleansing
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Test method for assessing the appearance of creases in fabrics after cleansing
|
90.93 | ISO/TC 38/SC 2 |
Textiles — Test method for assessing the smoothness appearance of seams in fabrics after cleansing
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Test method for assessing the smoothness appearance of seams in fabrics after cleansing
|
90.93 | ISO/TC 38/SC 2 |
Textiles — Determination of dimensional changes of fabrics induced by cold-water immersion
|
90.93 | ISO/TC 38/SC 2 |
Knitted fabrics — Types — Vocabulary
|
90.93 | ISO/TC 38/SC 20 |
Woven fabrics — Description of defects — Vocabulary
|
90.93 | ISO/TC 38/SC 20 |
Knitted fabrics — Description of defects — Vocabulary
|
95.99 | ISO/TC 38/SC 20 |
Knitted fabrics — Description of defects — Vocabulary
|
90.93 | ISO/TC 38/SC 20 |
Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area
|
95.99 | ISO/TC 38 |
Nonwovens — Test methods — Part 1: Determination of mass per unit area
|
60.60 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 2: Determination of thickness
|
95.99 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 2: Determination of thickness
|
90.93 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 2: Determination of thickness — Technical Corrigendum 1
|
60.60 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation
|
95.99 | ISO/TC 38 |
Nonwovens — Test methods — Part 3: Determination of tensile strength and elongation at break using the strip method
|
60.60 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance
|
95.99 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance
|
95.99 | ISO/TC 38 |
Nonwovens — Test methods — Part 4: Determination of tear resistance by the trapezoid procedure
|
60.60 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 5: Determination of resistance to mechanical penetration (ball burst procedure)
|
90.92 | ISO/TC 38 |
Nonwovens — Test methods — Part 5: Determination of resistance to mechanical penetration (ball burst procedure)
|
40.99 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 6: Absorption
|
90.92 | ISO/TC 38 |
Nonwovens — Test methods — Part 6: Absorption
|
40.99 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 7: Determination of bending length
|
95.99 | ISO/TC 38 |
Nonwovens — Test methods — Part 7: Determination of bending length
|
60.60 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 8: Determination of liquid strike-through time (simulated urine)
|
90.92 | ISO/TC 38 |
Nonwovens — Test methods — Part 8: Determination of liquid strike-through time (simulated urine) for nonwoven coverstocks
|
40.60 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 9: Determination of drape coefficient
|
95.99 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 9: Determination of drapability including drape coefficient
|
90.93 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 10: Lint and other particles generation in the dry state
|
90.20 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 11: Run-off
|
90.92 | ISO/TC 38 |
Nonwovens — Test methods — Part 11: Run-off
|
40.99 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 12: Demand absorbency
|
90.20 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time
|
95.99 | ISO/TC 38 |
Nonwovens — Test methods — Part 13: Repeated liquid strike-through time (simulated urine)
|
60.60 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 14: Coverstock wetback
|
95.99 | ISO/TC 38 |
Nonwovens — Test methods — Part 14: Coverstock wetback (simulated urine)
|
60.60 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 15: Determination of air permeability
|
90.93 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 16: Determination of resistance to penetration by water (hydrostatic pressure)
|
90.93 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 17: Determination of water penetration (spray impact)
|
90.93 | ISO/TC 38 |
Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
|
95.99 | ISO/TC 38 |
Nonwovens — Test methods — Part 18: Determination of tensile strength and elongation at break using the grab tensile test
|
60.60 | ISO/TC 38 |
Textiles — Nonwovens — Definition
|
95.99 | ISO/TC 38 |
Textiles — Nonwovens — Definition
|
95.99 | ISO/TC 38 |
Nonwovens — Vocabulary
|
90.92 | ISO/TC 38 |
Textiles — Determination of the permeability of fabrics to air
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Woven fabrics — Determination of tear resistance by the falling pendulum method
|
95.99 | ISO/TC 38 |
Textiles — Weaves — Coding system and examples
|
90.93 | ISO/TC 38/SC 20 |
Textiles — Weaves — Coding system and examples — Technical Corrigendum 1
|
60.60 | ISO/TC 38/SC 20 |
Textiles — Determination of water repellency of fabrics by the Bundesmann rain-shower test
|
90.93 | ISO/TC 38/SC 2 |
Textiles — Effect of dry heat on fabrics under low pressure — Part 1: Procedure for dry-heat treatment of fabrics
|
90.60 | ISO/TC 38/SC 2 |
Textiles — Effect of dry heat on fabrics under low pressure — Part 2: Determination of dimensional change in fabrics exposed to dry heat
|
90.60 | ISO/TC 38/SC 2 |
Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method
|
60.60 | ISO/TC 38/SC 2 |
Textiles — Determination of surface burning time of fabrics
|
90.92 | ISO/TC 38 |
Textiles — Fabrics for awnings and camping tents — Specification
|
95.99 | ISO/TC 83 |
Sports and recreational equipment — Fabrics for awnings and camping tents — Specification
|
95.99 | ISO/TC 83 |
Sports and recreational equipment — Fabrics for awnings — Specification
|
95.99 | ISO/TC 83 |
Textiles — Nonwovens — Web formation and bonding — Vocabulary
|
95.99 | ISO/TC 38 |
Textiles — Web formation and bonding in nonwovens — Vocabulary
|
90.93 | ISO/TC 38 |
Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing
|
95.99 | ISO/TC 38/SC 2 |
Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing
|
90.93 | ISO/TC 38/SC 2 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus — Technical Corrigendum 1
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown — Technical Corrigendum 1
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss — Technical Corrigendum 1
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change — Technical Corrigendum 1
|
60.60 | ISO/TC 38/SC 24 |
Woven fabrics — Distortion — Determination of skew and bow
|
90.60 | ISO/TC 38/SC 24 |
Textile — Biaxial tensile properties of woven fabric — Determination of elasticity properties using a cruciform test piece
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method
|
90.20 | ISO/TC 38/SC 24 |
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
|
90.92 | ISO/TC 38/SC 24 |
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam opening method
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2: Fixed load method
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 3: Needle clamp method
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) — Technical Corrigendum 1
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Tear properties of fabrics — Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Tear properties of fabrics — Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension
|
90.20 | ISO/TC 38/SC 24 |
Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension
|
95.99 | ISO/TC 38/SC 24 |
Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension
|
90.20 | ISO/TC 38/SC 24 |
Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing
|
90.92 | ISO/TC 38/SC 2 |
Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing
|
50.00 | ISO/TC 38/SC 2 |
Textiles — Bare elastane yarns — Determination of resistance to chlorinated water (swimming-pool water)
|
90.93 | ISO/TC 38/SC 23 |
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 1: Test method using corona charging
|
90.93 | ISO/TC 38 |
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2: Test method using rotary mechanical friction
|
90.93 | ISO/TC 38 |
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 3: Test method using manual friction
|
90.93 | ISO/TC 38 |
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 4: Test method using horizontal mechanical friction
|
90.93 | ISO/TC 38 |
Superfine woven wool fabric labelling — Requirements for Super S code definition
|
90.93 | ISO/TC 38 |
Textiles — Determination of water absorption time and water absorption capacity of textile fabrics
|
90.93 | ISO/TC 38 |
Textiles — Determination of the elasticity of fabrics — Part 1: Strip tests
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of the elasticity of fabrics — Part 1: Strip tests — Amendment 1
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Determination of the elasticity of fabrics — Part 2: Multiaxial tests
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of the elasticity of fabrics — Part 3: Narrow fabrics
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of the elasticity of fabrics — Part 3: Narrow fabrics — Amendment 1
|
40.00 | ISO/TC 38/SC 24 |
Textiles — Determination of fabric deformability by forced mechanical distension
|
60.60 | ISO/TC 38/SC 24 |
Textiles — Fabrics — Determination of width and length
|
90.93 | ISO/TC 38/SC 24 |
Textiles — Determination of dimensional change of fabrics — Accelerated machine method
|
90.92 | ISO/TC 38/SC 2 |
Textiles — Determination of dimensional change of fabrics — Accelerated machine method
|
40.60 | ISO/TC 38/SC 2 |
Textiles — Knitted fabrics — Representation and pattern design
|
90.20 | ISO/TC 38/SC 20 |
Textiles — Biaxial tensile properties of woven fabric — Determination of maximum force and elongation at maximum force using the grab method
|
60.60 | ISO/TC 38/SC 24 |
Textiles and textile products — Guidelines on the determination of the precision of a standard test method by interlaboratory trials
|
60.60 | ISO/TC 38/SC 24 |
No matching records found. Please try changing the filter settings.