Acceptance code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or finishing conditions

Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or finishing conditions

Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions

Acceptance code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled machine tools

Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes

Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes — Technical Corrigendum 1

Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes

Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes

Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes — Amendment 1

Test code for machine tools — Part 3: Determination of thermal effects

Test code for machine tools — Part 3: Determination of thermal effects

Test code for machine tools — Part 3: Determination of thermal effects

Test code for machine tools — Part 4: Circular tests for numerically controlled machine tools

Test code for machine tools — Part 4: Circular tests for numerically controlled machine tools

Test code for machine tools — Part 4: Circular tests for numerically controlled machine tools

Test code for machine tools — Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)

Test code for machine tools — Part 7: Geometric accuracy of axes of rotation

Test code for machine tools — Part 7: Geometric accuracy of axes of rotation

Test code for machine tools — Part 8: Determination of vibration levels

Test code for machine tools — Part 8: Vibrations

Test code for machine tools — Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations

Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools

Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools — Amendment 1: Measuring performance with scanning probes

Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools

Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools

Test code for machine tools — Part 11: Measuring instruments suitable for machine tool geometry tests

Test code for machine tools — Part 12: Accuracy of finished test pieces

Test code for machine tools — Part 13: Guidelines for the determination of the measuring performance of machine tools equipped with contacting probes and used as coordinate measuring machines

Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Part 0: General introduction

Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 1: Machines with horizontal spindle

Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 2: Machines with horizontal spindle

Test conditions for milling machines with table of variable height — Testing of accuracy — Part 2: Machines with vertical spindle

Test conditions for milling machines with table of variable height — Testing of accuracy — Part 3: Machines with vertical spindle

Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy

Acceptance conditions for general purpose parallel lathes — Testing of the accuracy

Acceptance conditions for general purpose parallel lathes — Testing of the accuracy

Test conditions for milling machines with table of fixed height, with horizontal or vertical spindle — Part 0: General introduction

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy — Part 1: Machines with horizontal spindle

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy — Part 2: Machines with vertical spindle

Acceptance conditions for milling machines with table of fixed height with horizontal or vertical spindle — Testing of accuracy

Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy

Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy

Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy

Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy — Part 1: Machines with a table length of up to 1 600 mm

Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy — Part 1: Machines with table length of up to 1 600 mm

Acceptance conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy

Acceptance conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy

Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy

Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy — Amendment 1

Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy

Acceptance conditions for radial drilling machines with the arm adjustable in height — Testing of accuracy

Acceptance conditions for external cylindrical grinding machines with a movable table — Testing of accuracy

Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of accuracy

Test conditions for box type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests

Test conditions for box type vertical drilling machines — Testing of the accuracy — Part 2: Practical test

Test conditions for box type vertical drilling machines — Testing of the accuracy

Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests

Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 2: Practical test

Test conditions for pillar type vertical drilling machines — Testing of accuracy

Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 0: General introduction

Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table-type machines

Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table-type machines — Addendum 1

Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 1: Machines with fixed column and movable table

Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 2: Table-type machines

Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column and fixed table

Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column along the X-axis (floor type)

Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 3: Planer type machines with movable column

Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 3: Floor type machines with detached, stationary work-holding table

Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 3: Machines with movable column and movable table

Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 4: Planer type machines with movable column

Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle — Testing of the accuracy

Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table — General introduction and testing of the accuracy

Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy — Part 1: Single column type machines

Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy — Part 2: Portal type machines with moving table

Test conditions for turret and single spindle co-ordinate drilling and boring machines with table of fixed height with vertical spindle — High accuracy machines — Testing of the accuracy

Acceptance conditions for external cylindrical centreless grinding machines — Testing of the accuracy

Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy

Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy

Acceptance conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of accuracy

Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy

Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy

Acceptance conditions of mechanical dividing heads for machine tools — Testing of accuracy

Acceptance conditions for horizontal spindle capstan, turret and single spindle automatic lathes — Testing of the accuracy — Part 1: Machinable bar diameters greater than 25 mm

Acceptance conditions for horizontal spindle capstan, turret and single spindle automatic lathes — Testing of the accuracy — Part 2: Machinable bar diameters 25 mm or less and chuck diameter up to 160 mm

Machine tools — Test conditions for horizontal spindle turret and single spindle automatic lathes — Testing of the accuracy

Conditions of acceptance for horizontal internal broaching machines — Testing of the accuracy

Test conditions for horizontal internal type broaching machines — Testing of accuracy

Acceptance conditions for vertical surface type broaching machines — Testing of accuracy

Test conditions for vertical surface type broaching machines — Testing of accuracy

Acceptance conditions for gear hobbing machines — Testing of the accuracy

Acceptance conditions for broaching machines of vertical internal type — Testing of accuracy

Test conditions for vertical internal type broaching machines — Testing of accuracy

Test conditions for vertical internal type broaching machines — Testing of accuracy

Conditions of acceptance and installation for work-holding fixed tables of machine tools

Acceptance conditions for plano-milling machines — Testing of the accuracy — Part 1: Portal-type machines

Machine tools — Test conditions for bridge-type milling machines — Testing of the accuracy — Part 1: Fixed bridge (portal-type) machines

Machine tools — Test conditions for bridge-type milling machines — Part 1: Testing of the accuracy of fixed bridge (portal-type) machines

Machine tools — Conditions for testing the accuracy of bridge-type milling machines — Part 2: Travelling bridge (gantry-type) machines

Machine tools — Test conditions for bridge-type milling machines — Testing of the accuracy — Part 2: Travelling bridge (gantry-type) machines

Machine tools — Test conditions for bridge-type milling machines — Part 2: Testing of the accuracy of travelling bridge (gantry-type) machines

Acceptance conditions for copying attachments, integral or otherwise, for lathes — Testing of the accuracy

Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)

Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)

Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)

Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle (vertical Z-axis)

Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)

Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis) — Technical Corrigendum 1

Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes

Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets

Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations

Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations — Technical Corrigendum 1

Test conditions for machining centres — Part 6: Accuracy of speeds and interpolations

Test conditions for machining centres — Part 6: Accuracy of speeds and interpolations — Amendment 1: 8-shaped interpolation motion (Annex A/B/CK5) and S-shaped interpolationmotion(Annex E)

Test conditions for machining centres — Part 7: Accuracy of a finished test piece

Test conditions for machining centres — Part 7: Accuracy of finished test pieces

Test conditions for machining centres — Part 7: Accuracy of finished test pieces

Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes

Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change

Test conditions for machining centres — Part 10: Evaluation of thermal distortions

Test conditions for machining centres — Part 10: Evaluation of thermal distortions

Machine tools — Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of accuracy — Part 1: Single column machines (cross slide table type and fixed table type)

Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 1: Single-column machines (cross-slide table type and fixed-table type)

Machine tools — Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of accuracy — Part 2: Two column machines (slide-head type and cross-slide table type)

Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 2: Double-column machines (slide-head type)

Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle

Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with horizontal workholding spindle(s)

Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle

Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle

Test conditions for numerically controlled turning machines and turning centres — Part 3: Geometric tests for machines with inverted vertical workholding spindles

Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes

Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of feeds, speeds and interpolations

Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of speeds and interpolations

Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece

Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece

Test conditions for numerically controlled turning machines and turning centres — Part 7: Evaluation of contouring performance in the coordinate planes

Test conditions for numerically controlled turning machines and turning centres — Part 8: Evaluation of thermal distortions

Machine tools — Test conditions for wire electrical-discharge machines (wire EDM) — Terminology and testing of the accuracy

Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy

Machine tools — Numerical compensation of geometric errors

Machine tool spindles — Evaluation of machine tool spindle vibrations by measurements on spindle housing — Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1

Machine tool spindles — Evaluation of spindle vibrations by measurements on non-rotating parts — Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min

Machine tool spindles — Evaluation of machine tool spindle vibrations by measurements on spindle housing — Part 3: Gear-driven spindles with rolling bearings operating at speeds between 600 r/min and 12 000 r/min

Machine tools — Test conditions for universal spindle heads — Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis)

Test conditions for numerically controlled broaching machines — Testing of accuracy — Vertical surface type broaching machines

Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools

Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools