Fire-resistance tests — Elements of building construction — Part 1: General requirements

Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 1

Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 2

Fire-resistance tests — Elements of building construction — Part 1: General requirements

Fire-resistance tests — Elements of building construction — Part 2: Requirements and recommendations for measuring furnace exposure on test samples

Fire-resistance tests — Elements of building construction — Part 2: Guidance on measuring uniformity of furnace exposure on test samples

Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and test data application

Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test

Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements

Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements

Fire-resistance tests — Elements of building construction — Part 6: Specific requirements for beams

Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns

Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns

Fire-resistance tests — Elements of building construction — Part 8: Specific requirements for non-loadbearing vertical separating elements

Fire-resistance tests — Elements of building construction — Part 8: Specific requirements for non-loadbearing vertical separating elements — Technical Corrigendum 1

Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements

Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements — Technical Corrigendum 1

Fire resistance tests — Elements of building construction — Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements

Fire resistance tests — Elements of building construction — Part 11: Specific requirements for the assessment of fire protection to structural steel elements

Fire resistance tests — Elements of building construction — Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces

Fire-resistance tests — Elements of building construction — Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings

Fire-resistance tests — Elements of building construction — Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar

Fire-resistance tests — Elements of building construction

Fire-resistance tests — Elements of building construction — Amendment 1

Fire-resistance tests — Elements of building construction — Amendment 2

Fire tests — Building materials — Non-combustibility test

Fire tests — Building materials — Non-combustibility test

Reaction to fire tests for building products — Non-combustibility test

Reaction to fire tests for products — Non-combustibility test

Reaction to fire tests for products — Non-combustibility test

Building materials — Determination of calorific potential

Reaction to fire tests for building products — Determination of the heat of combustion

Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)

Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)

Fire resistance tests — Door and shutter assemblies — Part 1: General requirements

Fire resistance tests — Door and shutter assemblies — Part 1: General requirements

Fire-resistance tests — Part 2: Lift landing door assemblies

Fire-resistance tests — Part 2: Lift landing door assemblies

Fire resistance tests — Part 3: Door and shutter assemblies horizontally oriented

Fire resistance tests — Door and shutter assemblies — Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction

Fire-resistance tests — Door and shutter assemblies

Fire-resistance tests — Door and shutter assemblies — Amendment 1

Fire resistance tests — Door and shutter assemblies

Fire-resistance tests — Door and shutter assemblies

Fire-resistance tests — Glazed elements

Fire-resistance tests — Glazed elements — Amendment 1

Fire-resistance tests — Elements of building construction — Glazed elements

Fire tests — Vocabulary

The development of tests for measuring "reaction to fire" of building materials

Standard tests for measuring reaction-to-fire of products and materials — Their development and application

Tests for measuring "reaction-to-fire" of building materials — Their development and application

Principles of structural fire-engineering design with special regard to the connection between real fire exposure and the heating conditions of the standard fire-resistance test (ISO 834)

Fire tests — Small chimneys — Testing at elevated temperatures

Fire tests — Reaction to fire — Ignitability of building products

Fire tests — Reaction to fire — Ignitability of building products

Reaction to fire tests — Ignitability of building products using a radiant heat source

Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread

Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread

Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building products in vertical configuration

Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration

Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration — Amendment 1

Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen

Fire tests — Reaction to fire — Part 1: Rate of heat release from building products — (Cone calorimeter method)

Fire tests — Reaction to fire — Part 1: Rate of heat release from building products — (Cone calorimeter method) — Technical Corrigendum 1

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method)

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) — Amendment 1

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 2: Smoke production rate (dynamic measurement)

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of heat release for determination of low levels of combustibility

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres

Fire tests — Reaction to fire — Smoke generated by building products (dual-chamber test)

Fire tests — Evaluation of performance of smoke control door assemblies — Part 1: Ambient temperature test

Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests

Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests — Amendment 1

Fire tests — Smoke control door and shutter assemblies — Part 2: Commentary on test method and test data application

Fire tests — Smoke-control door and shutter assemblies — Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy

Fire-resistance tests — Contribution made by suspended ceilings to the protection of steel beams in floor and roof assemblies

The development of tests for measuring toxic hazards in fire

Fire containment — Elements of building construction — Part 1: Ventilation ducts

Fire containment — Elements of building construction — Part 1: Ventilation ducts — Amendment 1

Fire containment — Elements of building construction — Part 1: Ventilation ducts

Fire containment — Elements of building construction — Part 2: Kitchen extract ducts

Fire resistance tests — Ventilation ducts

Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration

Reaction-to-fire tests — Full-scale room tests for surface products — Part 2: Technical background and guidance

Fire tests — Full-scale room test for surface products

Fire tests — Full-scale room test for surface products — Technical Corrigendum 1

Principles and rationale underlying calculation methods in relation to fire resistance of structural elements

Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method

Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method — Amendment 1

Fire resistance tests — Fire dampers for air distribution systems — Part 2: Classification, criteria and field of application of test results

Fire resistance tests — Fire dampers for air distribution systems — Part 3: Guidance on the test method

Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism

Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism — Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen

Fire resistance tests — Fire dampers for air distribution systems — Part 5: Intumescent fire dampers

Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals

Fire tests for building elements and components — Fire testing of service installations — Part 2: Linear joint (gap) seals

Fire tests for building elements and components — Fire testing of service installations — Part 2: Linear joint (gap) seals — Technical Corrigendum 1

Fire tests for building elements and components — Fire testing of service installations — Part 3: Single component penetration seals — Guidance on the construction and use of test configurations and simulated services to characterise sealing materials

Uses of reaction to fire test results — Part 1: Application of test results to predict fire performance of internal linings and other building products

Uses of reaction to fire test results — Part 2: Fire hazard assessment of construction products

Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 1: Guidance on ignitability

Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single flame source test

Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single flame source test — Technical Corrigendum 1

Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test

Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test

Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test — Technical Corrigendum 1

Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test

Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test

Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test

Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test — Technical Corrigendum 1

Reaction to fire tests — Measurement of material properties using a fire propagation apparatus

External exposure of roofs to fire — Part 1: Test method

External exposure of roofs to fire — Part 1: Test method

External fire exposure to roofs — Part 2: Classification of roofs

External exposure of roofs to fire — Part 2: Classification of roofs

External exposure of roofs to fire — Part 3: Commentary

Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 1: Loadbearing elements and vertical and horizontal separating elements

Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 2: Non-loadbearing elements

Fire-resistance tests — Guidance on the application and extension of results

Computational structural fire design — Review of calculation models, fire tests for determining input material data and needs for further development

Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals

Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets

Reaction-to-fire tests for sandwich panel building systems — Part 1: Test method for small rooms

Reaction to fire test for sandwich panel building systems — Part 1: Small room test

Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms

Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms

Reaction-to-fire tests for façades — Part 1: Intermediate-scale test

Reaction-to-fire tests for façades — Part 2: Large-scale test

Reaction-to-fire tests — Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)

Reaction to fire tests — Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)

Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products

Fire tests — Guidance on the choice of substrates for building products

Fire tests — Calibration and use of heat flux meters — Part 1: General principles

Fire tests — Calibration and use of radiometers and heat flux meters — Part 1: General principles

Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods

Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods

Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method

Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method

Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests

Fire tests — Calibration of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests

Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering

Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering

Fire tests— Reduced-scale model box test

Reaction to fire tests — Mass loss measurement

Reaction to fire tests — Mass loss measurement

Plastics — Guidance on fire characteristics and fire performance of PVC materials used in building applications

Reaction-to-fire tests — Small room test for pipe insulation products or systems

Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries — Part 1: General requirements

Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries — Part 2: Additional procedures for pipe penetration and cable transit sealing systems

Fire resistance tests — Elements of building construction — Requirements for active fire curtains

Guidance on the calculation of asymmetrical partitions/vertical membranes with respect to their fire resistance performance

Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels

Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels

Fire resistance tests — Fire dampers for air distribution systems — Part 1: Mechanical dampers

Fire resistance tests — Fire dampers for air distribution systems — Part 2: Intumescent dampers

Example for using reaction-to-fire test data for FSE

Reaction to fire tests — Fire growth — Full-scale test for stairs and stair coverings

Review of outputs for fire containment tests for buildings in the context of fire safety engineering

Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements

Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements

Determination of the resistance to jet fires of passive fire protection — Part 2: Guidance on classification and implementation methods

Determination of the resistance to jet fires of passive fire protection materials — Part 3: Extended test requirements

Reaction to fire test for sandwich panel building systems — Intermediate-scale box test

Determination of the resistance to gas explosions of passive fire protection materials — Part 1: General requirements

Determination of the resistance to gas explosions of passive fire protection materials — Part 2: Divisional substrates

Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW