Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Test code for machine tools — Part 5: Determination of the noise emission
|
90.93 | ISO/TC 39/SC 6 |
Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machinery — Part 1: Engineering method for free-field conditions over a reflecting plane
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machinery — Part 2: Survey method
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
|
95.99 | ISO/TC 43/SC 1 |
Test code for the measurement of the airborne noise emitted by rotating electrical machinery
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
|
90.93 | ISO/TC 43/SC 1 |
Measurement of airborne noise emitted by compressor/primemover-units intended for outdoor use
|
95.99 | ISO/TC 118/SC 6 |
Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (Grade 2)
|
90.93 | ISO/TC 118/SC 6 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
|
90.93 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement — Amendment 1: Measurement uncertainty
|
60.60 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps and mixing valves
|
90.93 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances — Amendment 1
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
|
90.60 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances
|
90.93 | ISO/TC 43/SC 2 |
Hydraulic fluid power — Test code for the determination of airborne noise levels — Part 1: Pumps
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps
|
90.92 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for the determination of airborne noise levels — Part 2: Motors
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors
|
90.92 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for determination of airborne noise levels — Part 3: Pumps — Method using a parallelepiped microphone array
|
90.92 | ISO/TC 131/SC 8 |
Acoustics — Noise labelling of machinery and equipment
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Declaration and verification of noise emission values of machinery and equipment
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Measurement of airborne noise emitted by construction equipment intended for outdoor use — Method for determining compliance with noise limits
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Tractors and machinery for agriculture and forestry — Measurement of noise at the operator's position — Survey method
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Tractors and machinery for agriculture and forestry — Measurement of noise at the operator's position — Survey method — Amendment 1
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Tractors and machinery for agriculture and forestry — Measurement of noise at the operator's position — Survey method
|
95.99 | ISO/TC 23/SC 2 |
Tractors for agriculture and forestry — Measurement of noise at the operator's position — Survey method
|
90.60 | ISO/TC 23/SC 2 |
Acoustics — Determination of sound power levels of noise from air terminal devices, high/low velocity/pressure assemblies, dampers and valves by measurement in a reverberation room
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Guidelines for the preparation of test codes of engineering grade requiring noise measurements at the operator's or bystander's position
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement of sound pressure levels of gas turbine installations for evaluating environmental noise — Survey method
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement of airborne noise emitted by earth-moving machinery — Method for determining compliance with limits for exterior noise — Stationary test condition
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement of exterior noise emitted by earth-moving machinery — Stationary test conditions
|
95.99 | ISO/TC 43/SC 1 |
Earth-moving machinery — Determination of sound power level — Stationary test conditions
|
90.93 | ISO/TC 127/SC 2 |
Acoustics — Measurement of airborne noise emitted by earth-moving machinery — Operator's position — Stationary test condition
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement at the operator's position of noise emitted by earth-moving machinery — Stationary test conditions
|
95.99 | ISO/TC 43/SC 1 |
Earth-moving machinery — Determination of emission sound pressure level at operator's position — Stationary test conditions
|
90.93 | ISO/TC 127/SC 2 |
Earth-moving machinery — Determination of emission sound pressure level at operator's position — Stationary test conditions — Technical Corrigendum 1
|
60.60 | ISO/TC 127/SC 2 |
Acoustics — Measurement of exterior noise emitted by earth-moving machinery — Dynamic test conditions
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement of exterior noise emitted by earth-moving machinery — Dynamic test conditions — Amendment 1
|
95.99 | ISO/TC 43/SC 1 |
Earth-moving machinery — Determination of sound power level — Dynamic test conditions
|
90.93 | ISO/TC 127/SC 2 |
Acoustics — Measurement at the operator's position of noise emitted by earth-moving machinery — Dynamic test conditions
|
95.99 | ISO/TC 43/SC 1 |
Earth-moving machinery — Determination of emission sound pressure level at operator's position — Dynamic test conditions
|
90.93 | ISO/TC 127/SC 2 |
Earth-moving machinery — Determination of emission sound pressure level at operator's position — Dynamic test conditions — Technical Corrigendum 1
|
60.60 | ISO/TC 127/SC 2 |
Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 1: Engineering method
|
60.60 | ISO/TC 70 |
Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 2: Survey method
|
60.60 | ISO/TC 70 |
Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 3: Survey method for use in situ
|
60.60 | ISO/TC 70 |
Reciprocating internal combustion engines — Measurement of emitted airborne noise — Engineering method and survey method
|
95.99 | ISO/TC 70 |
Acoustics — Measurement at the operator's position of airborne noise emitted by chain saws
|
95.99 | ISO/TC 23/SC 17 |
Acoustics — Agricultural and forestry wheeled tractors and self-propelled machines — Measurement of noise emitted when in motion
|
95.99 | ISO/TC 23/SC 2 |
Agricultural and forestry tractors — Measurement of noise emitted when in motion
|
90.60 | ISO/TC 23/SC 2 |
Underwater acoustics — Measurement of radiated underwater sound from percussive pile driving — In situ determination of the insertion loss of barrier control measures underwater
|
60.60 | ISO/TC 43/SC 3 |
Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 2: Methods for stated values for individual machines
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 3: Simple (transition) method for stated values for batches of machines
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Measurement of airborne noise emitted by computer and business equipment
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment — Amendment 1: Noise measurement specification for CD/DVD-ROM drives
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Estimation of airborne noise emitted by machinery using vibration measurement
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement at the operator's position of airborne noise emitted by brush saws
|
95.99 | ISO/TC 43/SC 1 |
Airborne noise emitted by machine tools — Operating conditions for woodworking machines
|
90.93 | ISO/TC 39/SC 6 |
Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method — Amendment 1
|
60.60 | ISO/TC 43/SC 1 |
Airborne noise emitted by machine tools — Operating conditions for metal-cutting machines
|
90.93 | ISO/TC 39/SC 6 |
Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method
|
95.99 | ISO/TC 70 |
Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise
|
60.60 | ISO/TC 70 |
Acceptance code for gears — Part 1: Determination of airborne sound power levels emitted by gear units
|
95.99 | ISO/TC 60 |
Acceptance code for gear units — Part 1: Test code for airborne sound
|
90.60 | ISO/TC 60 |
Manually portable chain-saws with internal combustion engine — Determination of sound power levels — Engineering method (grade 2)
|
95.99 | ISO/TC 23/SC 17 |
Acoustics — Measurement of high-frequency noise emitted by computer and business equipment
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Declared noise emission values of computer and business equipment
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Declared noise emission values of information technology and telecommunications equipment
|
90.93 | ISO/TC 43/SC 1 |
Cinematography — Background acoustic noise levels in theatres, review rooms and dubbing rooms
|
90.60 | ISO/TC 36 |
Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted
|
90.93 | ISO/TC 43/SC 1 |
Textile machinery — Noise test code — Part 1: Common requirements
|
90.93 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 1: Common requirements — Amendment 1
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 1: Common requirements — Amendment 2
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
|
90.93 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery — Amendment 1
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery — Amendment 2
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 3: Nonwoven machinery
|
90.93 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 3: Nonwoven machinery — Amendment 1
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 3: Nonwoven machinery — Amendment 2
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery
|
90.93 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 1
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery
|
90.93 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery — Amendment 1
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery — Amendment 2
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery
|
95.99 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery — Amendment 1
|
95.99 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery — Amendment 2
|
95.99 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery
|
90.93 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery
|
90.93 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery — Amendment 1
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery — Amendment 2
|
60.60 | ISO/TC 72/SC 8 |
Textile machinery acoustics — Determination of sound pressure levels and sound power levels emitted by textile machines — Engineering and survey methods
|
95.99 | ISO/TC 72/SC 8 |
Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method — Amendment 1
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method
|
60.60 | ISO/TC 43/SC 2 |
Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Method for the measurement of airborne noise emitted by small air-moving devices
|
95.99 | ISO/TC 43/SC 1 |
Gas turbines and gas turbine sets — Measurement of emitted airborne noise — Engineering/survey method
|
95.99 | ISO/TC 192 |
Turbines and turbine sets — Measurement of emitted airborne noise — Engineering/survey method
|
90.93 | ISO/TC 192 |
Acoustics — Methods for the description and physical measurement of single impulses or series of impulses
|
90.92 | ISO/TC 43/SC 1 |
Acoustics — Methods for the description and physical measurement of single impulses or series of impulses — Technical Corrigendum 1
|
60.60 | ISO/TC 43/SC 1 |
Manually portable brush-cutters and grass-trimmers with internal combustion engine — Determination of sound power levels — Engineering method (Grade 2)
|
95.99 | ISO/TC 23/SC 17 |
Acoustics — Test code for the measurement of airborne noise emitted by power lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions — Technical Corrigendum 1
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions — Amendment 1
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane — Technical Corrigendum 1
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Survey method in situ
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Survey method in situ — Technical Corrigendum 1: (Applies to French version only)
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections — Amendment 1
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level — Amendment 1
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Method requiring environmental corrections
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Method requiring environmental corrections — Technical Corrigendum 1
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 2: Introduction to the physics of low-noise design
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment — Technical Corrigendum 1
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code
|
90.92 | ISO/TC 43/SC 1 |
Sound power rating of air-conditioning and air-source heat pump equipment — Part 1: Non-ducted outdoor equipment
|
90.93 | ISO/TC 86/SC 6 |
Sound power rating of air-conditioning and air-source heat pump equipment — Part 2: Non-ducted indoor equipment
|
90.93 | ISO/TC 86/SC 6 |
Reciprocating internal combustion engines — Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
|
90.92 | ISO/TC 70 |
Reciprocating internal combustion engines — Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
|
40.00 | ISO/TC 70 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview
|
90.92 | ISO/TC 117 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Amendment 1
|
60.60 | ISO/TC 117 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Technical Corrigendum 1
|
60.60 | ISO/TC 117 |
Fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview
|
40.20 | ISO/TC 117 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method
|
90.92 | ISO/TC 117 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method — Technical Corrigendum 1
|
60.60 | ISO/TC 117 |
Fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method
|
40.20 | ISO/TC 117 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods
|
90.92 | ISO/TC 117 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods — Amendment 1
|
60.60 | ISO/TC 117 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods — Technical Corrigendum 1
|
60.60 | ISO/TC 117 |
Fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods
|
40.00 | ISO/TC 117 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 4: Sound intensity method
|
90.92 | ISO/TC 117 |
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 4: Sound intensity method — Technical Corrigendum 1
|
60.60 | ISO/TC 117 |
Fans — Determination of fan sound power levels under standardized laboratory conditions — Part 4: Sound intensity method
|
40.20 | ISO/TC 117 |
Acoustics — Stationary audible warning devices used outdoors — Part 1: Field measurements for determination of sound emission quantities
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Stationary audible warning devices used outdoors — Part 2: Precision methods for determination of sound emission quantities
|
90.93 | ISO/TC 43/SC 1 |
Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 1: Introduction
|
90.93 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 2: Measurement of the speed of sound in a fluid in a pipe
|
90.92 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 2: Measurement of the speed of sound in a fluid in a pipe
|
50.00 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance
|
60.60 | ISO/TC 131/SC 8 |
Acoustics — Noise control design procedures for open plant
|
90.92 | ISO/TC 43/SC 1 |
Acoustics — Noise control design procedures for open plant
|
40.00 | ISO/TC 43/SC 1 |
Acoustics — Acoustic insulation for pipes, valves and flanges
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Acoustic insulation for pipes, valves and flanges — Technical Corrigendum 1
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Acoustic insulation for pipes, valves and flanges
|
90.92 | ISO/TC 43/SC 1 |
Hand-held non-electric power tools — Noise measurement code — Engineering method (grade 2)
|
90.93 | ISO/TC 118/SC 3 |
Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Measurement of sound pressure level from service equipment or activities in buildings — Engineering method
|
60.60 | ISO/TC 43/SC 2 |
Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps
|
90.60 | ISO/TC 131/SC 8 |
Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement — Technical Corrigendum 1
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 2: Estimation of muzzle blast and projectile sound by calculation
|
90.92 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 2: Calculation of muzzle blast
|
40.60 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 3: Guidelines for sound propagation calculations
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 3: Sound propagation calculations
|
90.92 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 4: Prediction of projectile sound
|
90.92 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 4: Calculation of projectile sound
|
40.60 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 5: Noise management
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Noise from shooting ranges — Part 6: Sound pressure measurements close to the source for determining exposure to sound
|
60.60 | ISO/TC 43/SC 1 |
Machinery for forestry — Noise test code
|
90.93 | ISO/TC 23/SC 15 |
Acoustics — Characterization of sources of structure-borne sound and vibration — Indirect measurement of blocked forces
|
90.92 | ISO/TC 43/SC 1 |
Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy
|
95.99 | ISO/TC 115 |
Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy
|
95.99 | ISO/TC 115 |
Liquid pumps and pumps units — Noise test code — Grades 2 and 3 of accuracy
|
90.20 | ISO/TC 115 |
Ships and marine technology — Marine cranes — Noise limits and measuring method
|
90.93 | ISO/TC 8/SC 4 |
Acoustics — Experimental method for transposition of dynamic forces generated by an active component from a test bench to a receiving structure
|
60.60 | ISO/TC 43/SC 1 |
Condition monitoring and diagnostics of machines — Acoustic emission
|
90.93 | ISO/TC 108/SC 5 |
Portable hand-held forestry machines — A-weighted emission sound pressure levels at the operator's station — Comparative data in 2002
|
95.99 | ISO/TC 23/SC 17 |
Forestry machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy)
|
95.99 | ISO/TC 23/SC 17 |
Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy)
|
95.99 | ISO/TC 23/SC 17 |
Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy)
|
60.60 | ISO/TC 23/SC 17 |
Textile machinery — Guide to the design of textile machinery for reduction of the noise emissions
|
90.93 | ISO/TC 72/SC 8 |
Fans — Air curtain units — Part 2: Laboratory methods of testing for sound power
|
90.20 | ISO/TC 117 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.