Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Withdrawal of ISO/R 598-1967
|
95.99 | ISO/TC 44 |
Methods for determining the mechanical properties of the weld metal deposited by electrodes 3,15 mm or more in diameter
|
95.99 | ISO/TC 44 |
Calculation of rectangular symmetrical fillet welds statically loaded in such a way that the transverse section is not under any normal stress
|
95.99 | ISO/TC 44 |
Withdrawal of ISO/R 626-1967
|
95.99 | ISO/TC 44 |
Withdrawal of ISO/R 627-1967
|
95.99 | ISO/TC 44 |
Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness
|
95.99 | ISO/TC 44 |
Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness — Addendum 1
|
95.99 | ISO/TC 44 |
Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick
|
95.99 | ISO/TC 44/SC 5 |
Recommended practice for radiographic examination of fusion welded joints — Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
|
95.99 | ISO/TC 44/SC 5 |
Recommended practice for radiographic examination of fusion welded joints — Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness
|
95.99 | ISO/TC 44/SC 5 |
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates up to 50 mm (2 in) thick
|
95.99 | ISO/TC 44 |
Welds in steel — Reference block for the calibration of equipment for ultrasonic examination
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
|
90.92 | ISO/TC 135/SC 3 |
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick
|
95.99 | ISO/TC 44 |
Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick
|
95.99 | ISO/TC 44/SC 5 |
Radiography of welds and viewing conditions for films — Utilization of recommended patterns of image quality indicators (I.Q.I.)
|
95.99 | ISO/TC 44/SC 5 |
Welds — Symbolic representation on drawings
|
95.99 | ISO/TC 44 |
Welds — Symbolic representation on drawings
|
95.99 | ISO/TC 44/SC 7 |
Welded, brazed and soldered joints — Symbolic representation on drawings
|
95.99 | ISO/TC 44/SC 7 |
Welding and allied processes — Symbolic representation on drawings — Welded joints
|
95.99 | ISO/TC 44/SC 7 |
Welding and allied processes — Symbolic representation on drawings — Welded joints
|
90.92 | ISO/TC 44/SC 7 |
Welding requirements — Categories of service requirements for welded joints
|
95.99 | ISO/TC 44/SC 10 |
Welding requirements — Factors to be considered in specifying requirements for fusion welded joints in steel (technical influencing factors)
|
95.99 | ISO/TC 44/SC 10 |
Welding — Determination of hydrogen in deposited weld metal arising from the use of covered electrodes for welding mild and low alloy steels
|
95.99 | ISO/TC 44/SC 3 |
Welding — Determination of hydrogen in deposited weld metal arising from the use of covered electrodes for welding mild and low alloy steels — Addendum 1
|
95.99 | ISO/TC 44/SC 3 |
Welding — Determination of hydrogen in deposited weld metal arising from the use of covered electrodes for welding mild and low alloy steels — Addendum 2: Recommended methods of reporting single bead weld metal hydrogen contents
|
95.99 | ISO/TC 44/SC 3 |
Welding and allied processes — Determination of hydrogen content in ferritic steel arc weld metal
|
95.99 | IIW |
Welding and allied processes — Determination of hydrogen content in arc weld metal
|
95.99 | IIW |
Welding and allied processes — Determination of hydrogen content in arc weld metal
|
90.93 | IIW |
Radiographic inspection of resistance spot welds for aluminium and its alloys — Recommended practice
|
95.99 | ISO/TC 44/SC 6 |
Welded joints — Recommended practice for liquid penetrant testing
|
95.99 | ISO/TC 44 |
Fusion-welded butt joints in steel — Transverse tensile test
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Transverse tensile test
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Transverse tensile test
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Transverse tensile test
|
60.60 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Phased array ultrasonic testing (UT-PA) for thin-walled steel components — Acceptance levels
|
60.60 | ISO/TC 44/SC 5 |
Fusion welded butt joints in steel — Transverse root and face bend test
|
95.99 | ISO/TC 44 |
Destructive tests on welds in metallic materials — Bend tests
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Bend tests
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Bend tests — Amendment 1
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Bend tests
|
60.60 | ISO/TC 44/SC 5 |
Fusion welded butt joints in steel — Transverse side bend test
|
95.99 | ISO/TC 44 |
Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints
|
90.93 | ISO/TC 44/SC 5 |
Arc-welded joints in steel — Guidance on quality levels for imperfections
|
95.99 | ISO/TC 44/SC 10 |
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
|
95.99 | ISO/TC 44/SC 10 |
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections — Technical Corrigendum 1
|
95.99 | ISO/TC 44/SC 10 |
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
|
95.99 | ISO/TC 44/SC 10 |
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
|
60.60 | ISO/TC 44/SC 10 |
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding
|
95.99 | ISO/TC 44/SC 7 |
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding
|
90.93 | ISO/TC 44/SC 7 |
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure
|
95.99 | ISO/TC 44/SC 7 |
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure
|
90.93 | ISO/TC 44/SC 7 |
Classification of imperfections in metallic fusion welds, with explanations
|
95.99 | ISO/TC 44/SC 7 |
Fundamental welding positions — Definitions and values of angles of slope and rotation for straight welds for these positions
|
95.99 | ISO/TC 44 |
Welds — Working positions — Definitions of angles of slope and rotation
|
95.99 | ISO/TC 44/SC 7 |
Welding and allied processes — Welding positions
|
95.99 | ISO/TC 44/SC 7 |
Welding and allied processes — Welding positions
|
90.93 | ISO/TC 44/SC 7 |
Welds in steel — Calibration block No. 2 for ultrasonic examination of welds
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
|
60.60 | ISO/TC 135/SC 3 |
Welding — Determination of ferrite number in austenitic weld metal deposited by covered Cr-Ni steel electrodes
|
95.99 | ISO/TC 44/SC 3 |
Welding — Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
|
95.99 | IIW |
Welding — Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
|
90.93 | IIW |
Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
|
60.60 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Fracture test
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Fracture test
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
|
90.93 | ISO/TC 44/SC 5 |
Welding and allied processes — Recommendations for joint preparation — Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
|
95.99 | ISO/TC 44/SC 7 |
Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
|
90.93 | ISO/TC 44/SC 7 |
Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels
|
60.60 | ISO/TC 44/SC 7 |
Welding and allied processes — Recommendations for joint preparation — Part 4: Clad steels
|
90.93 | ISO/TC 44/SC 7 |
Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding — Joint preparations for steel
|
95.99 | ISO/TC 44/SC 7 |
Electric resistance and induction welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
|
95.99 | ISO/TC 17/SC 19 |
Submerged arc-welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
|
95.99 | ISO/TC 17/SC 19 |
Arc-welded joints in aluminium and its weldable alloys — Guidance on quality levels for imperfections
|
95.99 | ISO/TC 44/SC 10 |
Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections
|
95.99 | ISO/TC 44/SC 10 |
Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections — Technical Corrigendum 1
|
95.99 | ISO/TC 44/SC 10 |
Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections
|
90.93 | ISO/TC 44/SC 10 |
Welding — Peel and chisel testing of resistance spot, projection and seam welds
|
95.99 | IIW |
Resistance welding — Peel and chisel testing of resistance spot and projection welds
|
95.99 | IIW |
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
|
95.99 | ISO/TC 44/SC 6 |
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
|
60.60 | ISO/TC 44/SC 6 |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
|
60.60 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
|
60.60 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
|
60.60 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
|
90.92 | ISO/TC 44/SC 5 |
Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections
|
95.99 | ISO/TC 17/SC 19 |
Welding — Laser-arc hybrid welding of steels, nickel and nickel alloys — Quality levels for imperfections
|
90.60 | ISO/TC 44/SC 10 |
Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints
|
90.93 | ISO/TC 44/SC 6 |
Mechanical joining — Guidelines for fatigue testing of joints
|
60.60 | ISO/TC 44/SC 6 |
Mechanical joining — Form-fit blind rivets and (lock) bolt joints — Specifications and qualification of testing procedures
|
90.60 | ISO/TC 44/SC 6 |
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
|
90.92 | ISO/TC 44/SC 5 |
Welded steel tubes for pressure purposes — Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
|
95.99 | ISO/TC 17/SC 19 |
Welding — Electron and laser-beam welded joints — Guidance on quality levels for imperfections — Part 1: Steel
|
95.99 | ISO/TC 44/SC 10 |
Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 1: Steel, nickel, titanium and their alloys
|
90.20 | ISO/TC 44/SC 10 |
Welding — Electron and laser beam welded joints — Guidance on quality levels for imperfections — Part 2: Aluminium and its weldable alloys
|
95.99 | ISO/TC 44/SC 10 |
Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 2: Aluminium, magnesium and their alloys and pure copper
|
60.60 | ISO/TC 44/SC 10 |
Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
|
95.99 | IIW |
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
|
90.93 | ISO/TC 44/SC 6 |
Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
|
95.99 | IIW |
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
|
95.99 | IIW |
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds — Technical Corrigendum 1
|
95.99 | IIW |
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
|
90.93 | ISO/TC 44/SC 6 |
Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
|
95.99 | IIW |
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
|
90.93 | ISO/TC 44/SC 6 |
Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
|
95.99 | IIW |
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
|
90.93 | ISO/TC 44/SC 6 |
Resistance spot welding and projection welds — Destructive testing of welds — Specimen dimensions and procedure for impact shear test and cross-tension testing
|
95.99 | IIW |
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
|
90.93 | ISO/TC 44/SC 6 |
Resistance spot welding — Destructive tests of welds — Method for the fatigue testing of spot welded joints
|
90.93 | ISO/TC 44/SC 6 |
Resistance welding — Destructive tests of welds — Failure types and geometric measurements for resistance spot, seam and projection welds
|
95.99 | ISO/TC 44/SC 6 |
Fatigue — Fatigue testing of welded components — Guidance
|
60.60 | IIW |
Static design procedure for welded hollow-section joints — Recommendations
|
90.60 | IIW |
Fatigue — Design procedure for welded hollow-section joints — Recommendations
|
90.20 | IIW |
Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels
|
90.92 | ISO/TC 44/SC 5 |
Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
|
90.92 | ISO/TC 164/SC 4 |
Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
|
30.60 | ISO/TC 164/SC 4 |
Destructive tests on welds in metallic materials — Etchants for macroscopic and microscopic examination
|
90.93 | ISO/TC 44/SC 5 |
Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for cross-tension testing of single joints
|
90.93 | ISO/TC 44/SC 6 |
Non-destructive testing of welds — General rules for fusion welds in metallic materials
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — General rules for metallic materials
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — General rules for metallic materials
|
90.92 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — General rules for metallic materials
|
50.20 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
|
60.60 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
|
60.60 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Radiographic testing of fusion-welded joints
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Visual testing of fusion-welded joints
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Visual testing of fusion-welded joints
|
90.93 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Magnetic particle testing
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Magnetic particle testing
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
|
60.60 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing of welded joints
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
|
90.92 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 1: General
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
|
95.99 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
|
90.93 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
|
90.93 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
|
95.99 | ISO/TC 44/SC 6 |
Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
|
90.93 | ISO/TC 44/SC 6 |
Destructive tests on welds in metallic materials — Resistance welding — Pressure test on resistance seam welds
|
95.99 | ISO/TC 44/SC 6 |
Resistance welding — Destructive tests of welds — Pressure test of resistance seam welds
|
90.93 | ISO/TC 44/SC 6 |
Destructive tests on welds in metallic materials — Method for taking samples for delta ferrite measurement
|
95.99 | ISO/TC 44/SC 3 |
Welding — Multilingual terms for welded joints with illustrations
|
90.93 | ISO/TC 44/SC 7 |
Welding and allied processes — Designation system for imperfections
|
95.99 | ISO/TC 44/SC 7 |
Resistance welding — Weldability — Part 2: Alternative procedures for the assessment of sheet steels for spot welding
|
95.99 | ISO/TC 44/SC 6 |
Resistance welding — Weldability — Part 2: Evaluation procedures for weldability in spot welding
|
90.93 | ISO/TC 44/SC 6 |
Resistance welding — Weldability — Part 3: Evaluation procedures for weldability in spot weld bonding
|
90.93 | ISO/TC 44/SC 6 |
Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens
|
95.99 | ISO/TC 44/SC 6 |
Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens
|
90.93 | ISO/TC 44/SC 6 |
Friction stir spot welding — Aluminium — Part 1: Vocabulary
|
90.60 | IIW |
Friction stir spot welding — Aluminium — Part 2: Design of weld joints
|
90.60 | IIW |
Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels
|
90.92 | ISO/TC 44/SC 5 |
Welding for aerospace applications — Visual inspection of welds
|
40.60 | ISO/TC 44/SC 14 |
Guidelines on weld quality in relationship to fatigue strength
|
90.93 | IIW |
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
|
90.92 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
|
90.92 | ISO/TC 44/SC 5 |
Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
|
90.60 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Penetrant testing — Acceptance levels
|
90.93 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Magnetic particle testing — Acceptance levels
|
90.93 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
|
90.92 | ISO/TC 44/SC 5 |
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints
|
60.60 | ISO/TC 44/SC 6 |
Non‐destructive testing of welds — Ultrasonic testing — Use of automated total focusing technique (TFM) and related technologies
|
60.60 | IIW |
Non-destructive testing — Metal magnetic memory — Part 1: Vocabulary
|
95.99 | IIW |
Non-destructive testing — Metal magnetic memory — Part 1: Vocabulary and general requirements
|
60.60 | IIW |
Non-destructive testing — Metal magnetic memory — Part 2: General requirements
|
95.99 | IIW |
Non-destructive testing — Metal magnetic memory — Part 2: Inspection of welded joints
|
60.60 | IIW |
Non-destructive testing — Metal magnetic memory — Part 3: Inspection of welded joints
|
95.99 | IIW |
Friction stir welding - Ferrous materials — Part 2: Design of weld joints
|
30.99 | IIW |
Non-destructive testing of welds — Eddy current testing — Part 1: General
|
30.99 | IIW |
Friction stir welding — Aluminium — Part 2: Design of weld joints
|
95.99 | IIW |
Friction stir welding — Aluminium — Part 2: Design of weld joints
|
60.60 | IIW |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.