Фильтр :
| Стандарт и/или проект(0) | Этап | ТК |
|---|---|---|
|
Steel tubes for water and sewage
|
95.99 | ISO/TC 5/SC 1 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
|
90.60 | ISO/TC 138/SC 2 |
|
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method
|
90.93 | ISO/TC 138/SC 5 |
|
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply — Recommended practice for laying
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
|
90.93 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 2: Pipes (with or without integral sockets)
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 3: Fittings and joints
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 4: Valves and ancillary equipment
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
|
90.60 | ISO/TC 138/SC 2 |
|
Polyethylene (PE) pipes for water supply — Specifications
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Boxes used for retention, detention, storage and transportation systems — Specifications for storm water boxes made of PE, PP and PVC-U
|
60.60 | ISO/TC 138/SC 1 |
|
Ductile iron pipes — Centrifugal cement mortar lining — Composition controls of freshly applied mortar
|
95.99 | ISO/TC 5/SC 2 |
|
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities
|
95.99 | ISO/TC 138/SC 5 |
|
Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints
|
90.93 | ISO/TC 138/SC 5 |
|
Preinsulated ductile iron pipeline systems
|
95.99 | ISO/TC 5/SC 2 |
|
Preinsulated ductile iron pipeline systems
|
95.99 | ISO/TC 5/SC 2 |
|
Ductile iron pipes, fittings, accessories and their joints — Thermal preinsulated products
|
90.93 | ISO/TC 5/SC 2 |
|
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
|
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
|
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
|
Plastics piping systems for renovation of underground water supply networks — Part 1: General
|
95.99 | ISO/TC 138/SC 8 |
|
Plastics piping systems for renovation of underground water supply networks — Part 1: General
|
90.92 | ISO/TC 138/SC 8 |
|
Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes
|
90.92 | ISO/TC 138/SC 8 |
|
Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes
|
95.99 | ISO/TC 138/SC 8 |
|
Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes
|
90.92 | ISO/TC 138/SC 8 |
|
Plastics piping systems for renovation of underground water supply networks — Part 4: Lining with cured-in-place pipes
|
90.92 | ISO/TC 138/SC 8 |
|
Plastics piping systems for renovation of underground water supply networks — Part 11: Lining with inserted hoses
|
30.60 | ISO/TC 138/SC 8 |
|
Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 1: Polyethylene (PE) material
|
40.20 | ISO/TC 138/SC 8 |
|
Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 2: Thermoset composite materials
|
40.20 | ISO/TC 138/SC 8 |
|
Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material
|
40.20 | ISO/TC 138/SC 8 |
|
Plastics piping systems for water supply and drainage and sewerage under pressure – modified poly(vinyl chloride)(PVC-M) pipe
|
40.00 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Multilayer pipes and their joints, based on thermoplastics, for water supply
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
|
95.99 | ISO/TC 138/SC 4 |
|
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
|
95.99 | ISO/TC 138/SC 4 |
|
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems
|
90.93 | ISO/TC 138/SC 4 |
|
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems — Amendment 1
|
60.60 | ISO/TC 138/SC 4 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
|
90.93 | ISO/TC 138/SC 2 |
|
Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services
|
95.99 | ISO/TC 224 |
|
Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services
|
60.60 | ISO/TC 224 |
|
Service activities relating to drinking water supply, wastewater and stormwater systems — Stormwater management — Guidelines for stormwater management in urban areas
|
90.60 | ISO/TC 224 |
|
Service activities relating to drinking water supply, wastewater and stormwater systems — Examples of good practices for stormwater management
|
60.60 | ISO/TC 224 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.
- Интернет-магазин
- Каталог стандартов
- МКС
- 93
- 93.025 - External water conveyance systems