The HTML version of JCGM 100, on which ISO/IEC Guide 98-3:2008 is based, can be found at http://www.iso.org/sites/JCGM/JCGM-introduction.htm.
The electronic version of this Guide can be downloaded from the ISO/IEC Directives and Guides web page.
Тезис
ПредпросмотрISO/IEC Guide 98-3:2008 is a reissue of the 1995 version of the Guide to the Expression of Uncertainty in Measurement (GUM), with minor corrections. This Guide establishes general rules for evaluating and expressing uncertainty in measurement that can be followed at various levels of accuracy and in many fields — from the shop floor to fundamental research. The principles of this Guide are intended to be applicable to a broad spectrum of measurements, including those required for:
- maintaining quality control and quality assurance in production;
- complying with and enforcing laws and regulations;
- conducting basic research, and applied research and development, in science and engineering;
- calibrating standards and instruments and performing tests throughout a national measurement system in order to achieve traceability to national standards;
- developing, maintaining, and comparing international and national physical reference standards, including reference materials.
-
Текущий статус: PublishedДата публикации: 2008-10
Исправленный вариант (английский): 2010-11 -
Версия: 1
-
- ICS :
- 17.020 Metrology and measurement in general
Приобрести данный стандарт
Формат | Язык | |
---|---|---|
std 1 208 | Бумажный |
- CHF208
Жизненный цикл
-
Ранее
WithdrawnISO/IEC Guide 98:1993
-
Сейчас
PublishedISO/IEC Guide 98-3:2008
Стандарт, который пересматривается каждые 5 лет
Этап: 90.20 (Hа стадии пересмотра)-
00
Предварительная стадия
-
10
Стадия, связанная с внесением предложения
-
20
Подготовительная стадия
-
30
Стадия, связанная с подготовкой проекта комитета
-
40
Стадия, связанная с рассмотрением проекта международного стандарта
-
50
Стадия, на которой осуществляется принятие стандарта
-
60
Стадия, на которой осуществляется публикация
-
90
Стадия пересмотра
-
95
Стадия, на которой осуществляется отмена стандарта
Исправления / Изменения
PublishedISO/IEC Guide 98-3:2008/Suppl 1:2008
PublishedISO/IEC Guide 98-3:2008/Suppl 2:2011
-
00
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)
Будьте в курсе актуальных новостей ИСО
Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах.