International Standard
ISO 6721-5:2019
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
Reference number
ISO 6721-5:2019
Версия 2
2019-04
International Standard
Предпросмотр
p
ISO 6721-5:2019
73145
недоступно на русском языке
Опубликовано (Версия 2, 2019)

ISO 6721-5:2019

ISO 6721-5:2019
73145
Формат
Язык
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document describes a flexural, non-resonance method for determining the components of the flexural complex modulus Ef* of polymers at frequencies typically in the range 0,01 Hz to 100 Hz. Higher-frequency measurements can be made, but significant errors in the dynamic properties measured are likely to result (see 10.2.2 and 10.2.3). The method is suitable for measuring dynamic storage moduli in the range 10 MPa to 200 GPa.

NOTE Although materials with moduli less than 10 MPa can be studied, more accurate measurements of their dynamic-mechanical properties can be made using shear modes of deformation (see ISO 6721-6).

This method is particularly suited to the measurement of loss factors greater than 0,02 and can therefore be conveniently used to study the variation of dynamic properties with temperature and frequency through most of the glass-rubber relaxation region (see ISO 6721‑1). The availability of data determined over wide ranges of both frequency and temperature enables master plots to be derived, using frequency/temperature shift procedures, which present dynamic properties over an extended frequency range at different temperatures.

Общая информация

  •  : Опубликовано
     : 2019-04
    : Систематический пересмотр между-народного стандарта [90.20]
  •  : 2
  • ISO/TC 61/SC 5
    83.080.01 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)