Filter :
Standard and/or project under the direct responsibility of ISO/TC 61/SC 2 Secretariat | Stage | ICS |
---|---|---|
Plastics — Determination of temperature of deflection under load — Part 1: General test method
|
95.99 | |
Plastics — Determination of temperature of deflection under load — Part 1: General test method
|
95.99 | |
Plastics — Determination of temperature of deflection under load — Part 1: General test method
|
95.99 | |
Plastics — Determination of temperature of deflection under load — Part 1: General test method
|
60.60 | |
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
|
95.99 | |
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
|
95.99 | |
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
|
90.60 | |
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
95.99 | |
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
90.92 | |
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
40.60 | |
Plastics and ebonite — Determination of temperature of deflection under load
|
95.99 | |
Plastics — Determination of flexural properties
|
95.99 | |
Plastics — Determination of flexural properties
|
95.99 | |
Plastics — Determination of flexural properties — Amendment 1: Precision statement
|
95.99 | |
Plastics — Determination of flexural properties
|
95.99 | |
Plastics — Determination of flexural properties — Amendment 1
|
95.99 | |
Plastics — Determination of flexural properties
|
90.60 | |
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
95.99 | |
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test — Amendment 1
|
95.99 | |
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
95.99 | |
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
60.60 | |
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
|
95.99 | |
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Amendment 1: Precision data
|
95.99 | |
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
|
60.60 | |
Plastics — Determination of Charpy impact strength of rigid materials
|
95.99 | |
Plastics — Determination of Charpy impact strength
|
95.99 | |
Plastics — Determination of Charpy impact strength — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of Izod impact strength of rigid materials
|
95.99 | |
Plastics — Determination of Izod impact strength
|
95.99 | |
Plastics — Determination of Izod impact strength — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of Izod impact strength
|
95.99 | |
Plastics — Determination of Izod impact strength — Amendment 1
|
95.99 | |
Plastics — Determination of Izod impact strength — Amendment 2: Precision data
|
95.99 | |
Plastics — Determination of Izod impact strength
|
95.99 | |
Plastics — Determination of Izod impact strength
|
60.60 | |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature
|
95.99 | |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
95.99 | |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
95.99 | |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
95.99 | |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
60.60 | |
Plastics — Determination of stiffness in torsion of flexible materials — Part 1: General method
|
90.93 | |
Plastics — Determination of stiffness in torsion of flexible materials — Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
|
90.93 | |
Plastics — Determination of stiffness in torsion as a function of temperature
|
95.99 | |
Plastics — Determination of tensile properties — Part 1: General principles
|
95.99 | |
Plastics — Determination of tensile properties — Part 1: General principles — Amendment 1: Details of extensometer
|
95.99 | |
Plastics — Determination of tensile properties — Part 1: General principles — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of tensile properties — Part 1: General principles
|
95.99 | |
Plastics — Determination of tensile properties — Part 1: General principles
|
90.60 | |
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
95.99 | |
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
90.92 | |
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
40.60 | |
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of tensile properties
|
95.99 | |
Plastics — Testing with the torsion pendulum
|
95.99 | |
Plastics — Determination of compressive properties
|
95.99 | |
Plastics — Determination of compressive properties
|
90.93 | |
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
95.99 | |
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
90.60 | |
Plastics — Determination of creep behaviour — Part 1: Tensile creep
|
95.99 | |
Plastics — Determination of creep behaviour — Part 1: Tensile creep
|
95.99 | |
Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1
|
95.99 | |
Plastics — Determination of creep behaviour — Part 1: Tensile creep
|
90.93 | |
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
|
95.99 | |
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
|
95.99 | |
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
|
95.99 | |
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
|
60.60 | |
Plastics — Determination of tensile creep
|
95.99 | |
Plastics — Determination of the brittleness temperature by impact
|
95.99 | |
Plastics — Determination of the brittleness temperature by impact
|
90.93 | |
Plastics — Determination of hardness — Part 1: Ball indentation method
|
95.99 | |
Plastics — Determination of hardness — Part 1: Ball indentation method
|
95.99 | |
Plastics — Determination of hardness — Part 1: Ball indentation method
|
90.93 | |
Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
|
95.99 | |
Plastics — Determination of hardness — Part 2: Rockwell hardness
|
90.93 | |
Plastics and ebonite — Determination of hardness by the ball indentation method
|
95.99 | |
Plastics — Multipurpose test specimens
|
95.99 | |
Plastics — Multipurpose test specimens
|
95.99 | |
Plastics — Multipurpose test specimens
|
90.93 | |
Plastics — Determination of modulus of elasticity by alternating flexure
|
95.99 | |
Plastics — Determination of tensile properties by use of small specimens
|
95.99 | |
Plastics — Friction and wear by sliding — Identification of test parameters
|
95.99 | |
Plastics — Friction and wear by sliding — Identification of test parameters
|
90.93 | |
Plastics — Determination of flexural creep by three-point loading
|
95.99 | |
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 1: Falling dart method
|
95.99 | |
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing
|
90.93 | |
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 2: Instrumented puncture test
|
95.99 | |
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
|
95.99 | |
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
|
60.60 | |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method — Amendment 1
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method — Amendment 1
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method — Amendment 1: Precision
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
|
95.99 | |
Plastics — Determination of damping properties and complex modulus by bending vibration
|
95.99 | |
Plastics — Determination of tensile-impact strength
|
95.99 | |
Plastics — Determination of tensile-impact strength — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of tensile-impact strength
|
95.99 | |
Plastics — Determination of tensile-impact strength
|
60.60 | |
Plastics — Determination of resistance to wear by abrasive wheels
|
95.99 | |
Plastics — Determination of resistance to wear by abrasive wheels
|
95.99 | |
Plastics — Determination of resistance to wear by abrasive wheels
|
90.93 | |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
|
95.99 | |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
|
95.99 | |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials — Amendment 1
|
95.99 | |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
|
90.92 | |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
|
50.00 | |
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
|
95.99 | |
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
|
95.99 | |
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
|
60.60 | |
Plastics — Acquisition and presentation of comparable single-point data
|
95.99 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
|
95.99 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
|
95.99 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
|
95.99 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
|
60.60 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
|
95.99 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
|
95.99 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
|
95.99 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
|
60.60 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
|
95.99 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
|
95.99 | |
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
|
60.60 | |
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
|
95.99 | |
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach — Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres
|
95.99 | |
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
|
90.60 | |
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
|
95.99 | |
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing — Technical Corrigendum 1
|
95.99 | |
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
|
90.92 | |
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
|
40.60 | |
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
|
95.99 | |
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
|
90.60 | |
Plastics — Determination of linear dimensions of test specimens
|
95.99 | |
Plastics — Determination of linear dimensions of test specimens — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of linear dimensions of test specimens
|
90.93 | |
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
|
95.99 | |
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
|
90.60 | |
Plastics — Guide to the acquisition and presentation of design data
|
90.93 | |
Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility
|
90.93 | |
Plastics — Determination of tensile properties at high strain rates
|
90.93 | |
Plastics — Strain rate dependent tensile tests for thermoplastics at ambient temperature
|
40.20 | |
Plastics — Determination of scratch properties
|
90.92 | |
Plastics — Determination of scratch properties
|
40.60 | |
Plastics — Instrumented micro-indentation test for hardness measurement
|
90.93 | |
Plastics — Determination of abrasive wear by reciprocating linear sliding motion
|
60.60 | |
Plastics — Test specimens
|
95.99 | |
Plastics — Test specimens
|
95.99 | |
Plastics — Test specimens
|
60.60 | |
Plastics and ebonite — Verification of Shore durometers
|
90.93 | |
Plastics — Validation of force-time curves obtained from high-speed tensile tests
|
60.60 | |
Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method
|
60.60 | |
Adhesives — Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
|
90.93 | |
Plastics — Determination of J-R curves — Fracture toughness
|
60.60 | |
Plastics — Determination of mode I plane-strain crack-arrest toughness
|
90.60 |
No matching records found. Please try changing the filter settings.