ISO 18752:2022
2022-03
Abstract
This document specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes.
They are suitable for use with:
— oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging from −40 °C to +100 °C for types AS, AC, BS and BC hoses and from −40 °C to +120 °C for types CS, CC and DC hoses.
— water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from −40 °C to +70 °C.
— water at temperatures ranging from 0 °C to +70 °C.
This document does not include requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components.
NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.
General information
-
Status: PublishedPublication date: 2022-03Stage: International Standard to be revised [90.92]
-
Edition: 4Number of pages: 16
-
Technical Committee :ISO/TC 45/SC 1ICS :23.040.70
- RSS updates
Next version under development
ISO/DIS 18752
ISO/DIS 18752
Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification
Life cycle
-
Previously
WithdrawnISO 18752:2014
-
Now
-
Will be replaced by
Under developmentISO/DIS 18752
